Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 2
Passo 2
-
Remove the 11 mm screw from the right side of the hard drive access panel using a Phillips #0 screwdriver.
-
Remove the 3.5 mm screw from the left side of the access panel using a Phillips #0 screwdriver.
-
Use a plastic opening tool to pry off the access panel from the bottom.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.