Salta al contenuto principale
iPad Air LTE Upper Component Cable Bracket Replacement

iPad Air LTE Upper Component Cable Bracket Replacement

Andrew Optimus Goldheart

Andrew Optimus Goldheart e 4 altri collaboratori

Ultimo aggiornamento il July 19, 2024

Nessuna stima
Moderato
Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Introduzione

Vai al passo 1

prereq for everything upper case

Cosa ti serve

Strumenti

Mostra di più…

  1. iPad Air LTE Upper Component Cable Bracket Replacement, Upper Component Cable Bracket: passo 1, immagine 1 di 1
    • Remove the following screws securing the upper component cable bracket:

    • Two 2.0 mm Phillips screws

    • Three 1.4 mm Phillips screws

  2. iPad Air LTE Upper Component Cable Bracket Replacement: passo 2, immagine 1 di 2 iPad Air LTE Upper Component Cable Bracket Replacement: passo 2, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    • Use tweezers to start peeling back the tape securing the upper component cable bracket.

  3. iPad Air LTE Upper Component Cable Bracket Replacement: passo 3, immagine 1 di 3 iPad Air LTE Upper Component Cable Bracket Replacement: passo 3, immagine 2 di 3 iPad Air LTE Upper Component Cable Bracket Replacement: passo 3, immagine 3 di 3
    • Slowly peel the upper component cable bracket up out of the iPad—leaving the tape pieces on the bracket to make it easier to reinstall.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

iFixit Membro di iFixit

Staff

119 Membri

19.477 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 85