Salta al contenuto principale

Modifiche al passo #1

Modifica di Sam Omiotek

Modifica approvata da Sam Omiotek

Prima di
Dopo il
Invariato

Righe Passo

+[title] Remove the camera connector shield
+[* black] Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the camera connectors.
+[* black] Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.
+[* black] Repeat this procedure at different points around the shield until it is free. Remove the shield.
+[* icon_caution] Try not to deform the shield too much—you will need to reinstall it during reassembly.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto