Modifiche al passo #3
Modifica di Michael Rinaldi —
Modifica approvata da Michael Rinaldi
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] The next set of screws are not visible like the previous 5 screws we removed. | |
| [* black] To gain access to these screws, you need to remove the rubber grip that is outlined in the picture. (opposite from where the visible screws were) | |
| [* black] Grab your blue plastic opening tool and press it under the rubber on one side. Check out the image for a look on how to do it. You should be able to pull the rubber off once the plastic tool lifts it up. | |
| [* black] When the rubber grip is removed, the next 5 screws are now visible. Grab your Phillips screwdriver and remove the 5 screws as indicated in the next photo. These 5 screws have a Phillips head and are 1.7mm length. | |
| - | [* |
| + | [* icon_reminder] When removing the screws, make sure to place these screws separate from the other 5 screws on your magnetic pad as you do not want to mix them up. |