|
Introduction |
If the device is not powering on or holding a charge, this guide will assist you in removing and replacing the battery in the Retroid Pocket 3+ safely. This process will take approximately [x amount of time here]15-20 minutes, and the tools needed for the project are listed in this guide. | | ***For your safety, turn off the device and ensure the battery is fully discharged before starting this process.*** If your battery looks puffy or swollen, [link|https://www.ifixit.com/Wiki/[What_ to_ do_ with_ a_ swollen_ battery|take extra precautions when removing the battery.|new_window=true]] Remember to follow [link|https://www.ifixit.com/Wiki/[ESD#Section_Minimize_ESD_Risk|general electrostatic discharge (ESD) safety procedures|new_window=true]] when removing the battery. | | | ***Do not reuse the old battery after it has been removed, as it can cause a safety hazard.*** |
|