/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi

Cronologia dell'introduzione: Retroid Pocket 3 Battery Replacement

Modifica di Cassidy Anderson —

Modifica approvata da Cassidy Anderson

Prima di
Dopo il
Invariato
Dispositivo
Retroid Pocket 3
Type
replacement
Thing
Battery
Title
Retroid Pocket 3 Battery Replacement
Introduction
If the device is not powering on or holding a charge, this guide will assist you in removing and replacing the battery in the Retroid Pocket 3+ safely. This process will take approximately [x amount of time here], and the tools needed for the project are listed in this guide.
***For your safety, turn off the device and ensure the battery is fully discharged before starting this process.*** If your battery looks puffy or swollen, [link|https://www.ifixit.com/Wiki/What_to_do_with_a_swollen_battery|take extra precautions when removing the battery.|new_window=true] Remember to follow [link|https://www.ifixit.com/Wiki/ESD#Section_Minimize_ESD_Risk|general electrostatic discharge (ESD) safety procedures|new_window=true] when removing the battery.
***Do not reuse old battery after it has been removed, as it can cause a safety hazard.***
Time Required Min
Nessuna stima
Time Required Max
Nessuna stima
Imageid
Prima di
Dopo il
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Cassidy Anderson
Public
No

Strumenti

  • Spudger x1 added.
  • T5 Torx Screwdriver x1 added.
  • Phillips #00 Screwdriver x1 added.

Contrassegni

  • In Progress added.
  • Student In Progress added.

Passi

Passo #: 1
Prima di
Dopo il
stepid 364752 stepid 364752