|
Introduction |
| Use this guide to replace the bulb on your AuKing M8-F projector. | | | The bulb is a part of the projector that shines through its optical component(s) to create and magnify the image. If the bulb is not properly functioning, the projector can result in a black, blank screen. In some cases, the bulb may wear off when used too much than the exceeded maximal time. The bulb will likely need a replacement if your projector is showing any of the symptoms mentioned. | | Before continuing with this guide, please take a look at the [link|https://www.ifixit.com/Wiki/[AuKing_ M8-F|troubleshooting page|new_window=true]] to see if the cause of a blank screen may be because of the buld. Be sure to turn off your projector completely and disconnect any cable before starting this guide. |
|