Salta al contenuto principale

Cronologia dell'introduzione: Google Pixel 4 Back Panel Replacement

Modifica di Carsten Frauenheim

Modifica approvata da Carsten Frauenheim

Prima di
Dopo il
Invariato
Dispositivo
Google Pixel 4 XL
Type
replacement
Thing
Back Panel
Title
Google Pixel 4 XL Back Panel Replacement
Introduction
This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.
Use this guide to remove or replace the back glass panel on your Google Pixel 4 XL. The wireless charging coil, LED flash, and NFC hardware are all attached to this cover and will come out as one unit. If your replacement part does not have these components preinstalled, you will have to transfer parts from your original panel.
Removing the back glass panel is required to access all internal components.
Time Required Min
10 minuti
Time Required Max
20 minuti
Imageid
Prima di
Dopo il
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [https://www.ifixit.com/Answers/Device/Google%20Pixel%204%20XL|Answers community] for help.
[br]
Author
Public

Strumenti

  • SIM Card Eject Tool x1 aggiunto.
  • iFixit Opening Picks (Set of 6) x1 aggiunto.
  • iOpener x1 aggiunto.
  • Suction Handle x1 aggiunto.
  • Tweezers x1 aggiunto.
  • Spudger x1 aggiunto.
  • T3 Torx Screwdriver x1 aggiunto.

Ricambi

  • Google Pixel 4 XL Rear Cover Adhesive - Genuine x1 aggiunto.

Contrassegni

  • Prerequisite Only aggiunto.