|
Introduction |
In this guide, the USB port will be replaced on the Parrot Skycontroller 2P. If you are having trouble, with your phone connecting to the device, the [https://www.ifixit.com/Wiki/Parrot_Skycontroller_2_Troubleshooting|USB port] could be the problem. This guide will require desoldering and soldering the port. | | If you will be working on your Skycontroller 2, it is imperative that you remove the battery at the start. Also, if your Skycontroller 2 is not powering on or holding a charge, it is necessary to replace the battery. To replace the battery, use this guide. | | | Before beginning, make sure to power off your device completely and disconnect from any external power source. |
|