Toshiba Satellite C55-B5302 Hard Drive Replacement

Ultimo aggiornamento il December 6, 2022

10 - 15 minuti

Facile

Introduzione

Before starting this process you will need to remove the battery and take off the cover. It's easier than it looks and only requires a Phillips #0 screwdriver and a plastic opening tool. Expect to take about 10 minutes for this process from start to finish.

Cosa ti serve

Strumenti

Passo 1 Battery

Toshiba Satellite C55-B5302 Hard Drive Replacement, Battery: passo 1, immagine 1 di 2

Toshiba Satellite C55-B5302 Hard Drive Replacement, Battery: passo 1, immagine 2 di 2

Flip laptop upside down so you can see the screws.

Traduci

Passo 2

Using the Phillips #0 screwdriver, remove the two 7 mm screws from the back casing.

Traduci

Passo 3

Pull the battery from the back of the laptop for removal from the laptop.

Traduci

Passo 4 Hard Drive

Toshiba Satellite C55-B5302 Hard Drive Replacement, Hard Drive: passo 4, immagine 1 di 3

Toshiba Satellite C55-B5302 Hard Drive Replacement, Hard Drive: passo 4, immagine 2 di 3

Toshiba Satellite C55-B5302 Hard Drive Replacement, Hard Drive: passo 4, immagine 3 di 3

Remove the remaining 7 mm screws on the back panel of the laptop with a Phillips #0 screwdriver.
Use the plastic opening tool to pry up a corner of the back panel and continue to pop the back panel off.
Expect to hear popping as you pull the back panel off.

Traduci

Passo 5

The hard drive is held in place with a soft, blue rubber retainer. The retainer can be disconnected by pulling up on the two tabs at the left side of the hard drive in these images.

Traduci