Panoramica Video

Introduzione

10 anni fa Apple presentò il primissimo iPhone e cambiò il mondo. Oggi faremo a pezzi il 18º sviluppo successivo: l'iPhone X. Con i suoi bordi arrotondati e il display che si estende da un bordo all'altro, siamo sicuri che questo sia l'iPhone che Steve aveva immaginato tutti quegli anni fa. Ora però che il suo sogno si è realizzato, influenzerà il mondo come la prima versione? Sarà il tempo a dirlo, noi per ora faremo la nostra parte per aiutarti a esprimere un parere. Seguici mentre apriamo il gioiello della corona Apple per vedere che cosa è che lo fa brillare.

Un grandissimo grazie a Circuitwise per aver ospitato il nostro smontaggio, a Creative Electron per le immagini a raggi X ed a TechInsights per l'identificazione dei chip.

È un caso fortunato se siamo a Sydney, perché ora abbiamo uno store in Australia. Man mano che procediamo, pubblicheremo post su Facebook, Instagram e Twitter. Abbiamo anche una newsletter se tu sei un tipo da e-mail.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo iPhone X, usa il nostro manuale di assistenza.

L'iPhone X è qui! Ecco il ripieno di questo sandwich di vetro:
  • L'iPhone X è qui! Ecco il ripieno di questo sandwich di vetro:

    • Chip A11 "Bionico" con motore neurale e coprocessore di movimento integrato M11

    • Schermo "all-screen" OLED multitouch da 5,8" Super Retina HD con risoluzione di 2436 × 1125-pixel (458 ppi)

    • Fotocamera doppia da 12 MP (grandangolo e teleobiettivo) con aperture rispettive ƒ/1.8 e ƒ/2.4 e OIS (stabilizzazione ottica dell'immagine)

    • Fotocamera TrueDepth DA 7 MP con apertura ƒ/2.2, registrazione video HD 1080p e Face ID

    • Supporto per carica rapida e per carica wireless Qi

    • La nostra unità "globale" A1865 è dotata di un ampio supporto di bande cellulari oltre che di WiFi 802.11a/b/g/n/ac con tecnologia MIMO + Bluetooth 5.0 + NFC.

Which iPhone X model number are you investigating?

Dimitar - Replica

I think we can safely assume it’s the global A1901 model. Both other models are country specific according to EveryMac.com: A1865 for China and A1902 for Japan.

addvariety - Replica

A1865 is for US Verizon and Sprint too

Sam Sun -

On-cell display or in-cell display?

Albee Einstein - Replica

1901 is not global. It’s the GSM only version with the inferior Intel chips. The Qualcomm 1865 is the global/unlocked version.

Xiao - Replica

Where can I find a X with out LCD, Digitizer, screen?

Grant Nord - Replica

L'iPhone ha fatto molta strada in 10 anni: così tanta, infatti, che il design sta un po' richiudendo il ciclo. È da parecchio tempo che un nuovo iPhone non era così somigliante all'originale.
  • L'iPhone ha fatto molta strada in 10 anni: così tanta, infatti, che il design sta un po' richiudendo il ciclo. È da parecchio tempo che un nuovo iPhone non era così somigliante all'originale.

    • Eccetto naturalmente per la sporgenza della fotocamera, il bordino in acciaio inossidabile lucente, il retro in cristallo e il connettore Lightning...

    • Come nel caso precedente dell'iPhone 8 in questo stesso anno, Apple ha eliminato gli sgradevoli (ma all'insegna della responsabilità ambientale) richiami normativi dal retro dell'iPhone X.

Here in Ireland (and I guess across the EU) we have the ‘Designed by Apple in California Assembled in China’ text, the CE mark and the ‘no dumping’ bin graphic still in place.

Tom Mooney - Replica

Anyone who thinks the markings on the back of the iPhone will influence whether it is recycled (rather than the trade-in value, accessibility of recycling facility or a customer’s own environmental awareness) has probably shoved a spudger too far up their nose.

jessedouglas - Replica

Where did you get that minty fresh first-gen iPhone? Is it part of iFixit’s collection?

lelandjordon - Replica

I enjoy the snarkiness in these teardowns (see “10-ray”, below), but the ‘gorsh I hope them recyclers get the hint’ was just stupid.

Patrick - Replica

I’m really glad they took out the regulatory info on the back. It simply didn’t need to be there. You know you’re not supposed to throw an electronic away.

Liam Powell - Replica

  • Prima di lanciarci a corpo morto nel telefono, facciamo un po' di ricognizione a raggi 10 X grazie ai nostri amici di Creative Electron.

  • Ecco ciò che abbiamo trovato:

    • Non una, ma due celle batteria. È la prima volta in un iPhone!

    • Una scheda logica dagli ingombri super limitati. Basandosi sui punti di saldatura sovrapposti, sembra che sia in due strati disposti uno sull'altro.

    • Per lasciare spazio ai sensori extra nella parte anteriore, l'altoparlante da orecchio è stato parecchio spostato in basso.

    • C'è un chip misterioso tra il Taptic Engine e l'altoparlante inferiore: siamo curiosi di capire che cosa c'è sotto!

Aggiungi Commento

  • Questa vite pentalobe sembra stranamente non finita. Onestamente le viti inferiori sembrano più che altro dei perni.

    • La vite sposta così la sua parte di gambo filettata dal display al telaio in metallo, mentre la parte non filettata si estende in un perno bizzarramente lungo.

    • La nostra tesi è che questo permette al display un certo grado di flessibilità e al tempo stesso permette di spostare la sua staffa di montaggio verso l'interno del telefono; incidentalmente in questo modo lascia spazio a un connettore Lightning più massiccio.

  • Per fortuna, sembra che non abbiano risistemato molto altro, perciò il nostro tris formato da iOpener, iSclack e dagli Strumenti di apertura iFixit può continuare a lavorare come in passato.

    • Questo significa che non ci sono stati dei cambiamenti significativi nella robustezza e che lo schermo OLED è ben supportato da un telaietto, diversamente da altri display di nostra conoscenza.

The pin also applies downward pressure on the front panel, which probably helps with waterproofing.

pbialek - Replica

My iPhone X screen sometimes make a tiny noise when I press on the screen, like it’s adjusting a tiny bit. Is that normal since it’s flexible in it’s assemble or no?

Albert H - Replica

Depending on how hard you are pressing. Has the device ever been opened? If so, it could be because of the original adhesive-sealing not being properly in place due to the removal of the screen.

Alec - Replica

  • Si direbbe che l'apertura a libro dell'iPhone sia qualcosa destinato a durare. Apple ci aveva sorpreso applicandola nel 7 Plus, ma ora è diventata una soluzione standard.

  • Questa grande staffa singola copre tutte le connessioni della scheda logica: non abbiamo mai visto una tale densità in termini di connettori.

    • E ancora una volta incrociamo le armi con viti tri-wing che stanno di sentinella di fronte a qualsiasi riparazione, una volta che si è passati per le viti pentalobe a guardia della porta.

    • Qualcosa ci dice che alla fine Apple non vuole davvero che noi (o te) rovistiamo da queste parti.

The iPhone 7 also had a sideways opening that surprised the people doing the teardown

aa - Replica

As mentioned above.

sean -

  • Dopo aver liberato questa imponente monostaffa dalla scheda logica, possiamo finalmente dare un'occhiata all'hardware che fa funzionare l'ultima ammiraglia di Cupertino.

  • Più tardi daremo un'occhiata migliore all'hardware presente sul display. Per ora a soddisfarci bastano i raggi X: scopriamo che quel chip misterioso è montato sul display!

    • Ecco un cambiamento: il display si solleva senza portarsi dietro la fotocamera anteriore.

  • Questa foto conferma il layout che avevamo osservato nella nostra ricognizione a raggi X: la maggior parte dello spazio è occupato dalla nuova batteria a doppia cella mentre la scheda logica si è notevolmente ristretta.

Referencing the X-Ray image: I suspect the IR flood illuminator is the top flex mounted module just under the Face ID detector & dot projector (TrueDepth camera system). Note the heavy wiring in the ribbon and limited lines to the connector.

Dan - Replica

  • La doppia fotocamera posteriore presenta una grossa staffa che, si direbbe, offre un supporto a prova di piegatura per questi delicati componenti.

  • Le fotocamere sono ulteriormente fissate al case posteriore con dell'adesivo in espanso per tenerle ancora meglio al loro posto. Una "fermezza" necessaria perché queste fotocamere possono esprimere tutta la loro magia nel Portrait Mode e nelle altre modalità avanzate.

  • Attorno al vetro di copertura delle fotocamere, si possono vedere dei minuscoli punti di saldatura che probabilmente tengono aderenti al case le pareti della "gobba" della fotocamera.

I really wish there wasn’t a camera hump to hold securely ..

Darie H - Replica

Might that beefy bracket be made of Liquidmetal (see https://en.wikipedia.org/wiki/Liquidmeta...)? That is, is it surpisingly stiff? Apple has an exclusive license to use Liquidmetal in consumer electronics, but seems not to have used it extensively.

Dominic Dunlop - Replica

Quite likely bracket is for positioning and to apply even pressure on camera against rear glass.

pbialek - Replica

  • Abbiamo finalmente liberato la densissima scheda logica e quindi possiamo vederla in dettaglio.

  • Questa scheda logica miniaturizzata sfrutta lo spazio incredibilmente bene. La densità di connettori e componenti è senza precedenti. Alla fine, perfino un Apple Watch lascia sulla scheda più spazio libero.

  • La scheda compatta dell'iPhone X riesce a comprimere al suo interno ancora più tecnologia e ugualmente fa sembrare ingombrante e fin troppo lunga la scheda dell'iPhone 8 Plus disposta alla sua sinistra nella foto.

  • Confrontando l'impronta delle due schede madri, quella dell'iPhone X è grande circa il 70% di quella dell'iPhone 8 Plus e quindi lascia molto più spazio piano a disposizione della batteria.

just imagine how small it could be if they could get rid of the sim card tray

A. Gy. - Replica

That’ll happen soon, future iPhones will likely have esims like the apple watch s3.

Calvin H -

If that happens, how will users switch to other networks and install SIMs in their phone when they go abroad to avoid outrageous roaming charges?

Alex Jenner - Replica

  • Come avrà fatto Apple a mettere ancora più tecnologia nel 70% dell'area precedente? Piegando la scheda in due, naturalmente.

  • Le due metà sono saldate insieme, per cui abbiamo chiesto aiuto a chi ci ospita, Circuitwise, e alla loro stazione di rilavorazione saldature BGA ad aria calda, per separare gli strati.

    • Una volta separate le parti, abbiamo misurato l'area di tutti gli strati divisi e li abbiamo affiancati fino a coprire il 135% della superficie della scheda logica dell'iPhone 8 Plus. Ben fatto, Apple: più roba in meno spazio.

  • La scheda logica dell'iPhone X è la prima scheda in due strati che abbiamo mai visto in uno smartphone Apple a partire dal primissimo modello di iPhone (terza foto).

    • Il punto a sfavore di questa intelligente soluzione è che la riparazione a livello di scheda diventa estremamente difficoltosa e in qualche caso praticamente impossibile.

I’m sure the most outer row of via’s are extending the shielding around the sandwich. Even still thats a lot of lines being passed between the half’s! I can’t see anyone trying to open & fix this module.

Dan - Replica

You are missing the point. These are connecting the board physically, but there is no communication through those vias. You can see the other side of the board has all the connectors to flex. (On both boards). The third board act as a super stiffener to prevent overheating causing bending on the board. Great design!!!

Ramiro Montes de Oca - Replica

Sorry Ramiro the outer row are shielding (ground) the 2rd & 3rd rows are comm lines between the boards (interposer board).

Dan -

You’re mistaken, Ramiro. They created a third spacer PCB that lines the perimeter. And instead of connecting the two layers with a fussy flex cable, data travels along dozens of through-hole vias. Why do people spout about stuff they don’t know… it drives me mad!

Richard - Replica

You are Correct!

Dan -

Does the folded design take up more vertical space than the old logic board design, and if so, how did Apple account for this increased vertical space?

Was there vertical space open to begin with or does something in the design allow for more vertical space (i.e. the OLED panel is thinner)?

Thanks!

Urname - Replica

Yes, I think the OLED panel is considerably thinner. The X and 8 are pretty much the same thickness, so I think that that yes, it’s solely because of the OLED!

Liam Powell -

So Richard your assertion is that the silvered bumps all around the two boards are the vias? With a pitch of, what, 300µ?

The MacRumors article yesterday referred to an interposer between the two main boards, but I don’t see any such. Was MacRumors wrong, or am I missing something?

name99 - Replica

The outer perimeter of “silver bumps” aka solder balls is most likely all connected to ground. The rest must be signals. There is not enough cabling to support the required amount of signals between the two boards.

The interposer is still attached to the half in the top of the picture. The border of solder balls is higher than the rest of the PCB. This is required due to the night of the components on each PCB.

Truly incredible design. Passes data without cabling, affixes the two boards to each other without hardware, and creates an EMI shield without extra metal

Daniel Nadeau -

Is that a piece of flat flex connected across two parts of the lower board? going right under the middle screw hole

Andrew Cassidy - Replica

It’s the ribbon from the camera’s which is poking up.

Dan -

Dan, I don't think so. Its completely sealed inside the sandwich

Andrew Cassidy -

Thats just a kapton insulator sheet inside the sandwich. I thought you were talking about the other image.

Dan -

I believe it time to find some more of my good old LCD bonding 9703 3M anisotropic tape. That might be the ticket for servicing that motherboard. Still have some tape in stock, so my shop will service that motherboard, when parts become available.

Have a good weekend all.

Jan

Jan Schmidt - Replica

How did apple manage to take out heat from their processor? I still couldn’t understand how is this working…

Ayush Gupta - Replica

Good question! Given the fact the A11 chip is in the middle and doesn’t have any heat management unlike other SoC’s!

The chip is using the smallest Node tech available! TSMC using a 10 nmFinFET process. This must be how Apple is able to not worry about heat.

Dan -

You are all wrong :-) look at the RF board, there isn’t a signle trace routed from the armada of solder-pads, so I’d say they’re purely mechanical & GND /tekhead

Albert Einstein - Replica

You do understand the PCB is made up of layers.

Their won’t necessary be any visible traces on the surface besides what space is there! It’s so packed the lines would need to be buried inside the layers. One of the functions of via’s is to bring signals up and down the layers, clearly Apple is leveraging this here through the interposer board.

Dan -

@kyle - Can you take the circuit boards and take an image of the sandwich from the side or laid out in order so people can see the layers when pulled apart. I think people are getting confused on how they fit together.

Dan -

@kyle - Found a good image set from Tech Insights! Here’s the side views http://www.techinsights.com/uploadedImag... and http://www.techinsights.com/uploadedImag...

Dan - Replica

There’s a lot of need for intercommunication between the RF and the main CPU. There’s no other interconnect between the two boards. The perimeter vias have to be a communication bus.

Kyle Wiens - Replica

Does anyone knows how many PCB layers does each PCB half have?

Roj Snap - Replica

Anyone know who makes the logic board?

i heard a rumour but need to confirm

thx

Matt - Replica

  • Nella prima metà scheda:

    • SoC Apple A11 Bionic APL1W72 su 3 GB di RAM LPDDR4x SK Hynix H9HKNNNDBMAUUR

    • Apple 338S00341-B1

    • TI 78AVZ81

    • NXP 1612A1—molto probabilmente un'iterazione del chip 1610 tristar

    • Codec audio Apple 338S00248

    • STB600B0

    • Chip gestione alimentazione Apple 338S00306

What are those “white stickers” in different shapes on the board? Are they the typical for checking water damage? Are the same shapes stickers related to each other in any way? Function?

James - Replica

Some of these components have a polarity. The white or black dot or a triangle denotes positive or anode end of the cap or diode.

Dan -

I think those are inductors, and the white spot indicates the right direction for them to go on the board.

Liam Powell -

Which is A11 Apple processor module part number, on same package row as SoC die designation APL1W72? The A11 Apple processor module part number has a format 339S004xx. The A11 photos are without sufficient contrast and difficult to read.

Dimitar - Replica

No help on A11 Apple processor module part number in this analysed iPhone?

Dimitar -

339S00437 is the number you are looking for. You can found that in the photo shown in the Step 13.

APL1W72 could be the product number for Apple A11.

From known information, 339S00433, 339S00434, 339S00436, 339S00437, and 339S00439 are the part number for Apple A11.

JJ Wu - Replica

Is it me or are all the surface mount capacitors misaligned on the far right end? One is barely making contact with the pad. It’s like someone fudged it with their thumb picking it up.

Ian Melzer - Replica

I think that happens when you desolder it with hot air. It heats up the whole board.

Liam Powell -

  • Modulo Wi-Fi / Bluetooth Apple USI 170821 339S00397

  • Ricetrasmettitore LTE gigabit Qualcomm WTR5975

  • Modem LTE X16 Qualcomm MDM9655 Snapdragon e PMIC (chip gestione alimentazione ) PMD9655. Apple, però, ha un doppio fornitore di modem, così TechInsights nel suo modello A1901 ha trovato un Intel XMM7480 (PMB9948). Anche se il modem in sé potrebbe farlo, Apple non supporta velocità Gigabit con il componente Qualcomm.

  • Amplificatore di potenza Skyworks 78140-22, amplificatore di potenza SKY77366-17, S770 6662, 3760 5418 1736

  • Controller carica wireless Broadcom BCM59355

  • Modulo controller NFC NXP 80V18 PN80V

  • Broadcom AFEM-8072, modulo amplificatore di potenza MMMB

Maybe iPhone X v2 will not have any chips from Qualcomm. Amen

Vic Lau - Replica

Vic Lau, Qualcomm makes good chips at good prices, so there isn’t any reason Apple shouldn’t use them.

George A. - Replica

Yes, there is. They're suing each other.

https://arstechnica.com/gadgets/2017/10/...

Felipe Zavan -

If apple moves away from Qualcomm we can definitely expect a higher price tag on the next iteration of the iPhone

DAXimus -

BCM59355 is a wireless power chip, not Touch Controller

JohnnyNoy - Replica

Yea, ummmm, great design Apple, but it needs moar power amplifiers.

Patrick - Replica

Why do you say that ;-}

Dan -

The suing didn’t stop Qualcomm to get enough order apparently.

On the contrary,a higher price for customers to purchase iPhoneX seems to be the only result.

vivianangjoy - Replica

Theres more to it than the chips, It appears there are some licensing payments owed. Here’s a bit more Apple may completely drop Qualcomm as a modem supplier on future iPhone models

Dan -

Don’t forget Apple likely had a contract with Qualcomm a year ago before the law suit. Which is why they are forced to sell Apple the parts otherwise this could get very ugly legally!

Dan - Replica

Why does the X have 2 chips? Qualcomm WTR5975 gigabit LTE transceiver & Qualcomm MDM9655 Snapdragon X16 LTE  while the 8plus only has QualcommMDM9655Snapdragon X16 LTE modem? Does anyone know why?

ernie599 - Replica

Both those chips are present in Iphone 8 plus as well. They are just in different locations. Check step 10 in Iphone 8 plus tear-down.

Actually both the chips are required. MDM9655 is a baseband modem, and WTR5975 is a RF transceiver.

avinash parasuraman -

  • E all'esterno del sandwich che forma la scheda logica ci sono:

    • Memoria flash da 64 GB Toshiba TSB3234X68354TWNA1

    • Amplificatore audio Apple/Cirrus Logic 338S00296

Is the gold plated part a sim card reader?

K Sec - Replica

Kapton tape on the underside for insulation, yeah

Andrew Cassidy -

anyone can tell that the storage its a TLC or MLC?

leartzajmi - Replica

  • Ok, Apple ha fatto un circuito stampato a sandwich, ma come funziona?

    • Ha creato un terzo circuito stampato che funge da distanziale lungo il perimetro. E invece di unire i due strati con un fastidioso cavo flessibile, i dati viaggiano lungo dozzine di Via (vertical interconnect access) passanti.

  • Qui il SoC A11 trova posto al centro della scheda principale. Puoi farti un'idea della struttura 3D della scheda guardando le foto a raggi X. I cilindri attorno al bordo sono fori riempiti con materiale di saldatura per connettere le due schede.

Versus flex cables, the vias may be a more sound mechanism for communication between the boards BUT how will they fare when this handset is dropped!

DAXimus - Replica

Are the VIAs completely filled with solder, or are they hollow?

Dan - Replica

Dan, most through-hole vias are hollow.

Jharwin Barrozo - Replica

-> iFixit,

look again, there are no traces routed from those, so I don’t think any data is travelling through those. It’s just ground.

any relevant high-speed bus wouldn’t work well routed in that manner.

main board is the “computer“ where all the flexes come in to connect to screen & peripherals.

the rf-board is purely networking so very few wires has to connect between the main ARM and that board.

Albert Einstein - Replica

Albert, Review the comments in Step9 there is no other means for the two half to communicate with each other other than the vias and yes some are shielding (ground)

Dan -

Lel. Yeah. Those are just via stiching for shielding.

preziremprokletigugl -

What’s the diameter of the VIAs?

Dan - Replica

Maybe vias are security related. PCI homologation request for tamper-proof protection against encryption keys reading strait from RAM.

Evandro Zilio - Replica

I think you are right! but I’m not sure that which chip to process security function.

Victor Huang -

  • La nuova batteria a doppia cella ha quattro linguette di estrazione, simili a quelle più corte che avevamo trovato nella serie 8, benché con un orientamento completamente nuovo.

    • Le linguette aderiscono ai lati delle celle invece di essere ripiegate al di sopra, e questo rende la procedura un po' più complicata del solito.

  • Questo telefono incorpora una batteria da 10,35 Wh (2716 mAh a 3,81 V) che batte di misura la batteria dell'8 Plus da 10,28 Wh. Un progresso modesto in direzione del Galaxy Note8 con il suo mostro da 12,71 Wh.

  • La configurazione a doppia cella è una soluzione che consente di ottimizzare gli spazi più che di aumentare la capacità generale. Due celle permettono forme e configurazioni più creative, per poter trarre vantaggio dallo spazio lasciato dalla contrazione della scheda logica.

It might be my age showing but what type of Li-Ion supports charging up to 4.35 ? (I mean .. there’s the type that goes up in flames but .. ?)

Darie H - Replica

It is just a more stable battery that can handle higher voltage without damage. Even my Cubot Note S has 4,35V max voltage battery (4.150 mAh).

preziremprokletigugl -

Okay so I use this phone for all the photos of appliances that we take at Jackson Appliance Repair Company. The question I have is— is the battery itself waterproof? Or is the phone waterproof (protecting components inside) when it’s fully assembled?

Julie Toots - Replica

The device is waterproof. Batteries really can’t be made waterproof as they have exposed contacts which when shorted would be dangerous depending on how conductive the liquid was (i.e. salt water).

Dan -

  • Ehi, ricordate la funzionalità Face ID? In un insolito rovesciamento di tempi, l'abbiamo effettivamente testata prima ancora di fare a pezzi il telefono. Scoprendo che la nostra videocamera sensibile agli infrarossi non è veloce abbastanza da catturare il motivo di riferimento, ma in ogni caso riusciamo a vedere l'illuminazione!

  • L'ora di storia: molto prima di oggi, Microsoft realizzò un elegante sensore spaziale che chiamò Kinect. La tecnologia a matrice di punti infrarossi che lo faceva funzionare era stata creata dalla compagnia tecnologica israeliana PrimeSense.

  • Apple ha comprato PrimeSense per un bel 360 milioni di dollari nel 2013 e sicuramente da allora ha investito altre centinaia di milioni per portarlo sul mercato.

  • Nel frattempo, Microsoft si è ritrovata spiazzata e ha dovuto correre ai ripari per sviluppare un nuovo sistema di sensori per il Kinect 2. Forse ora che l'iPhone ha un sensore di profondità spaziale, qualcuno lo attaccherà anche ai droni!

The video is a nice addition.

SWegner - Replica

Kyle looks good in a lab coat!

Dan - Replica

Can you guys partner with someone with a fast enough IR camera to capture this? Would be really interesting.

DAXimus - Replica

I recognize that doctor from last week - best ‘turn my head and cough’ guy in a long time.

He is a doctor, right?

Patrick - Replica

@kyle tell your design team to add a play button over the image, people can easily miss that it’s a video. I thought it was just an image, but saw the comment about he enjoyed watching the video - so i hovered my mouse and then that’s I figured it’s really a video. :)

Jharwin Barrozo - Replica

I would not want the phone flashing in my face every time it unlocks

Jody - Replica

It’s IR. Human eyes can’t see it, so unlocking with Face ID is essentially just staring at it, and from the user’s perspective, it magically unlocks. No visible flashing here!

Liam Powell -

Jody, the flashes are invisible to the human eye. In the video you can hear the guy with the phone asking if the cameraman can see the flashes, because you need a special camera to view them. It’d be like staring into the end of a TV remote control and pushing buttons.

brandontoh93 - Replica

Not for me. I can see infrared easily.

Derek Mayo -

Esa luz que nosotros no vemos, sera dañina de tanto uso ?. Porque desbloqueamos el telefono muchisimas veces al dia.

That light that we do not see, will be harmful of so much use? Because we unlock the phone many times a day.

Ruben Aries - Replica

Here’s a good vid on the FaceID projector lighting up someones face: https://youtu.be/OvVKnC6gGtg Jump to 5:50 to see it.

Dan - Replica

so why MS did not buy ++PrimeSense?++

fuyun - Replica

Having designed a lens system for Occipital’s Structure sensor (which is also a Prime Sense derivative). The structured light emitter, which is actually a laser; vibrates to create the pattern that bathes your face. I am pretty sure the structure light source does not have the power to do anything besides scan your face, but also the infrared camera is lens system is probably tuned for 300 mm-500 mm unlike the Kinect(1), ASUS XTION or PrimeSense’s own early versions, which have a much longer range. If anyone is interested in doing more than just face scanning, check out Occipital’s website.: https://structure.io/ .

All Things 3D - Replica

  • Rivolgiamo la nostra attenzione alla parte superiore del telefono per trovare il sistema di fotocamera mini Kinect TrueDepth oggetto di tante anticipazioni! Questo sistema mette insieme una squadra di sensori per consentire il riconoscimento facciale all'X.

    • Primo passo in questo sistema: l'illuminatore a fascio largo integrato nel display investe la tua faccia di luce infrarossa (IR).

    • Nel passo successivo la fotocamera anteriore, contrassegnata in rosso, conferma la presenza di una faccia.

    • Poi il proiettore di punti IR, all'estrema destra, proietta una griglia di puntini sulla tua faccia per creare una mappa tridimensionale.

    • Infine, la fotocamera IR sulla sinistra legge questa mappa e manda i dati al telefono.

    • Sotto la pelle del sistema, c'è l'X che fa lavorare una magia software decisamente veloce per mettere insieme tutti i pezzi e capire se sei proprio tu oppure il tuo gemello cattivo.

Jump to Step6 X-Ray image to see the flood illuminator is just under the TrueDepth camera system. Review the note there.

Dan - Replica

Surely the ir camera senses the ir flood projector, not the standard camera…

Richard Birkby - Replica

There are three IR light sources used: The small pencil beam to see if the phone is face down or next to ones face (proximity) which uses the camera as the sensor (located just to the left of the speaker slot from the front). Then there is the flood illuminator which lets the camera ‘see’ if you are there (to discriminate there is a face present) just to the right of the camera. The third is the dot projector (on the right side of the speaker slot) to ID you. The same camera is used for all three functions no special IR camera here.

Dan - Replica

Do we know anything about the dimensions of the three components?

Arav - Replica

Can I buy that TrueDepth system?

JJ Delisle - Replica

  • La fine è vicina e noi lavoriamo sui componenti rimasti nel case posteriore.

    • Questa prima piccola staffa è ricoperta di connettori a molla e di spazzole di messa a terra EMI; ha un cavo a nastro fissato sul dorso.

    • Il prossimo a uscire è la copertura dell'altoparlante inferiore, piena di melassa adesiva impermeabile attorno alla porta.

    • Infine, liberiamo il TapticEngine e l'ormai celebre sfiato barometrico. Il Taptic Engine di Apple continua a sfruttare un oscillatore lineare per il motore di vibrazione.

Are there two speakers at the bottom?

Hossein Alavl - Replica

Nope just the one lower speaker. The second speaker is mounted to the upper portion of the display assembly.

Sam Lionheart -

How is vibration motor installe, it is glued or screwed?

nitin sharma - Replica

  • Come sempre in ottima forma, il nostro tecnico di smontaggi illustra la tecnica della doppia pinzetta che usa per rimuovere il connettore Lightning.

  • Buone notizie per i casi di cavi di carica contorti e strattonati: il connettore Lightning sembra extra rinforzato, con una staffa più grande avvitata sulla parete laterale del telaio.

    • Ci sono anche dei fori per far passare le viti esterne Pentalobe che si infilano nel display, come abbiamo visto in precedenza.

Is the Lightning connector two-sided? Pins on both sides like we originally saw in the iPad Air 2 (IIRC) and larger iPad Pro?

Scott - Replica

I don’t think it really matters. Apple’s Lightning Connector is double sided, so EVEN IF they DO have contact points on both sides, they probably would have wired them together anyway.

Xavier Jiang - Replica

The Lightning connector IS double sided, however the pins are NOT NECESSARILY physically tied together in the connector; ergo it actually supports 16-pins, not 8. So it DOES matter. A double-sided port could hypothetically support Thunderbolt, or 2 USB3 channels. And we have seen, inexplicably, a double-sided port from Apple before in the iPad Pro. A fully 2-sided Lightning connector/port could be functionally as capable as USB Type-C, minus the legacy USB 2.0 lanes. (The Type-C connector ALWAYS maintains a legacy USB 2.0 pair; Apple would have no need for that legacy combination if Thunderbolt was their forward-looking target.)

Scott - Replica

Scott,

Apple has already defined the connector https://en.wikipedia.org/wiki/Lightning_... I doubt they are going to mess it up making it polarized directionally at this point.

Dan -

  • Con il gruppo principale ormai ridotto in pezzi, rivolgiamo di nuovo la nostra attenzione allo schermo. La prima cosa che ci salta incontro è l'altoparlante da orecchio, ridisegnato con un elegante condotto per incanalare il suono fuori dal display.

  • Districando con cura le parti superiori dello schermo ci guadagniamo la collezione di componenti del display più complicata che abbiamo mai visto. È abitata da un altoparlante, un microfono, un sensore di luce ambiente, un illuminatore a largo campo e un sensore di prossimità.

  • Dopo aver tirato fuori tutti i pezzi modulari, ci resta il display nudo e crudo.

So what was that mystery chip first shown in the x-ray pictures?

aleksivanttinen - Replica

TechInsights has a nice picture. It’s BCM1595.

Astute - Replica

And what are the models/manufacturers of the ambient light sensor, flood illuminator, and proximity sensor?

Ricarte - Replica

What is the chip to the left f the Broadcom one? Long and thin with a metal cover.

TheOx - Replica

Whats the long thin chip next to the broadcom one?

TheOx - Replica

  • È ora di dare un'occhiata a questo chip misterioso! Con un piccolo aiuto dei nostri amici di TechInsights, puntiamo lo sguardo sotto le schermature sul retro del display e troviamo:

    • Un controller touchscreen della Broadcom, etichettato BCM15951B0KUB2G.

    • Lungo il percorso troviamo un nuovo dispositivo STMicro che non avevamo mai visto prima, un PMIC (chip gestione alimentazione) dell'OLED, etichettato 10 THADT733 X-139U.

The ST is more likely a boost converter, look at the inductors around it.

Too few pins to be a oled display-driver

Albert Einstein - Replica

  • Arrivando fino al nudo metallo dell'X, troviamo un altro pezzo familiare di questo puzzle ad alta densità: la bobina della ricarica wireless.

    • Ah, c'è di tutto attaccato, compresi il pulsante del volume, l'interruttore suoneria/silenzioso e la staffa di un sensore non meglio identificato.

  • Stacchiamo anche l'altro pazzo cavo multifunzione dalla parte superiore del telefono. In questo gruppo abitano il flash quad-Led True Tone e il pulsante di accensione, in modo simile agli iPhone dei tempi che furono.

Is the Qi coil that needs to be unobstructed for wireless charging just the center circle the ribbons are attached to or is it the whole unit?

cydeweyz - Replica

You can see the coil in step 3 x-ray images.

aleksivanttinen -

Just the big black coil.

George A. -

Is there anything special with the charging coil? Do you think they are being modest and when airpower comes out it will blow away qi coils?

Joseph Littler - Replica

What is the diameter of the coil? Just curious.

leres - Replica

  • Come bonus, facciamo un altro giro: che cosa ti succede se tu rompi il vetro posteriore nel tuo iPhone X nuovo di zecca?

  • Dopo tanto tanto calore, abbiamo imbracciato lo spudger e sfoderato il nostro Jimmy. Come per gli iPhone 8 e 8 Plus, l'X ha un pannello posteriore incollato in modo davvero molto serio.

  • Dopo tutto aver Jimmy-ato a lungo e con attenzione, siamo ancora bloccati: diversamente dal pannello posteriore in un solo pezzo dell'iPhone 8, qui la sporgenza la fotocamera si sovrappone al vetro posteriore ed è meticolosamente saldata al telaio di metallo sottostante.

  • In questa classica situazione di mano-incastrata-nel-vaso, possiamo optare per il taglio della mano (la gobba della fotocamera) o mandare in frantumi il vaso (il vetro posteriore). Grande.

    • Optiamo per la gobbectomia per mantenere intatto il pannello di vetro. Chi vuole sostituire un pannello rotto non ha alcuna alternativa valida; e avrà bisogno anche di un bel po' di tempo per poter rimuovere i cocci di vetro incollato.

Could you show the other side of the stainless shell? Is the glass apple logo and lettering at the bottom printed on the backside and glass layer over top?

Scott Miller - Replica

Scott - It appears the coloring is on the back side of the glass so the logo and text is printed from the back side the then over painted with the base color.

Dan - Replica

Yup, same as the 8, you can see the bare inside of the glass here.

Sam Lionheart - Replica

Is there any way to remove only the rear camera glass?

이상원 - Replica

looking for this solution

Leandro Santiago -

How was the camera bump removed?

Ivan Beatz - Replica

Destructively. It’s welded into place from the inside.

Jeff Suovanen -

Thanks - - - gonna need some better glasses.

Russ - Replica

where is antenna?

wmyang - Replica

Apple is still using the outer aluminum frame like the older iPhones. If you look carefully you’ll see the insulators which isolate the top and bottom sections which are the antennas.

Dan -

Is there any way to replace the mesh earpiece for this device?

Elana Chon - Replica

Considerazioni Finali
  • Le riparazioni dello schermo della batteria rimangono una priorità nella progettazione dell'iPhone.
  • Si può sostituire uno schermo rotto senza rimuovere l'hardware biometrico Face ID.
  • Le viti assortite sono preferibili alla colla ma servono cacciavite appositi per Apple (Pentalobe e tri-wing) oltre a un Phillips standard.
  • Le soluzioni per l'impermeabilizzazione complicano alcune riparazioni, ma rendono meno probabile dover intervenire per danni da liquidi.
  • Ci sono cavi intricati che creano gruppi complessi legando insieme componenti non correlati tra loro: una soluzione costosa e complicata da riparare.
  • L'uso di vetro davanti e dietro raddoppia la possibilità di danni da cadute; inoltre se si rompe il vetro posteriore, si devono rimuovere tutti i componenti e sostituire l'intero chassis.
Punteggio Riparabilità
6
Riparabilità 6 su 10
(10 è il più facile da riparare)

Un ringraziamento speciale a questi traduttori:

100%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Incredible and dense tech inside this iPhone - thanks ifixit!

Richard Armstrong - Replica

Wow! So exciting!

Reid Fleishman - Replica

Hello,

Could you give us more info about NFC antenna localization? I suppose it’s on top of the back panel (to avoid conflict with Qi )

Thanks

Joe - Replica

It’s the top bezel itself, as always.

Tom Chai -

An amazing repairability score for such a compact and advanced design.

NaN - Replica

Exactly! Given the amount of effort they put into shrinking (or folding) certain parts, it’s great to see they’ve put in the same effort to not make it harder to repair. That any modern smartphone will never receive a 10/10 score due to the design choices is acceptable, so I’m happy to see there’s still a reasonable way in. Not like some tablet/laptop hybrids that are horrendous to even open up; yes I’m looking at you Microsoft!

addvariety -

is the face id hardware programmed to the phone like the touch ID was? that would make replacing it impossible by 3rd parties.

i know its not connected to the screen, but still it may be a common repair like it is now.

karl - Replica

There isn’t really a reason why replacing the True Depth sensors should be a “common replacement” like the home button was. The home button had to be replaced because it was a physical piece of hardware that was pressed millions of times before failing. The True Depth sensor should fail rarely since it is protected under glass and won’t be hammered on constantly.

Jeremy1026 -

Very good! Finally different in the interior, the previous models were all the same!

Universo Técnico - Replica

Impressive just how much tech they crammed into this thing. The layout of the internals shows just how much thought went into this.

Sandy34 - Replica

Question which iPhone X version is this? with 2 Qualcom chips it looks like it is the Model A1865

Hayth - Replica

Apple claims that in order to make the screen curve with the edges, they had to fold part of the OLED screen over to hide the display driver right under the screen. Would you be able to verify that?

dvdhan - Replica

yes, there was an animation in the promo video. Looked weird. I’d like to know how they get the cutout in there.

And how do the cutout pixels account to the display resolution?

Andi -

Yes I saw this too, can you investigate more into the OLED display? In the video at 0:30, Jony Ive says “the custom OLED panel was engineered to fold and seamlessly combine with the external surfaces.” Their computer rendering really makes it appear there are hundreds of hidden pixels being illuminated. https://youtu.be/K4wEI5zhHB0?t=30s

Jackson Hern -

Sweet! I’m actually impressed by the efficiency of this.

James Buckhorn - Replica

The picture of the sandwich board is tilted and out of focus. Please retake from directly above

Mitch Hansen - Replica

Hey Mitch! We have top down photos of the logic board in steps 9, 10, 11, and 12! Check them out! The photo in step 13 is meant to describe depth, so the angle the focus on the chips inside is intentional!

Sam Lionheart -

@ifixit You did not reveal that mysterious chip on the display panel.

Simon - Replica

Please post XRay Wallpaper of the iPhone X! You guys are the only ones that do it right!

Hoang Le - Replica

Just snag the xray ‘wallpaper’ off the enlarged picture above… o.O

gibsonjont -

No sign of the display or touch driver chip?

Dylan - Replica

From a boardlevel repair perspective I sense this is mostly game over.

Separation of the two layers requires an amount of heat applied to the whole structure pretty much all soldering folks would consider unsafe including myself.

Lets all hope very strong that this design improves mechanical stability to a point where we wont have breaking solder joints any more and improved circuitry preventing most common damages. The level and style of catch up game with the repair industry apple plays here is disconcerting.

After settling with recent macs not to be considered buyable because of &&^&^$^ all components being soldered in and tethered added to ridiculous toylike features driving stupid prices now the iPhone is also beyond what I am willing to accept for such money.

Its depressing to see how fast apple from year to year is becoming more about profit and money and less about tech and users.

I wonder how long I have to wait until some other player comes up with a real alternative in terms of user experience.

Anton Chubukov - Replica

Yes i agree, what they did will make repairs harder you can see in this pictures some components moved from their place after separation which is a bad outcome.

Filip Pusca -

Have you considered the Essential Phone? It seems like they may have something special over there…

Gino J -

I have to agree. I started out in 1980 with my bsee degree repairing Apple 1’s 2’s and 3’s with an oscilloscope, soldering iron and the latest copy of the ic circuit handbook. I have not been thrilled about Apples progression from everyman’s or women’s mac to unserviceable sometimes throw away stuff that needs cottage industries to support what they can, when before it was mainstream repair with dig this, a service door!.

Ross Elkins -

@Ross Elkins: The Apple 1, ][ and /// were designs based on 7400-series TTL logic. Do you have any idea how big, power-hungry (and expensive!) devices like the iPhone would be, if they were designed with 7400 chips? If it would even be possible (which I seriously doubt), the PCBs stuffed-full of TTL logic would easily cover a football field, would require a 1000A power supply, and would cost $100,000 (or more)!!!

For you to even mention the repairability of stone knives and bearskins designs (no offense meant to Mssrs. Wozniak and company) like the first few Apple computers in the same breath as state of the art, massively-integrated product designs like the iPhone X strongly suggests that you wasted your money on that EE degree; because you certainly haven’t been keeping up with technology, even at a lay,an’s level.

Douglas McIntosh -

Yes, serviceability has definitely lost ground to compact design over the years. There are trade offs everywhere and either we carry around a brick with a removable back panel for component repair/replacement access, or have the smartphone design we do today where it's practically an extension of our body. I'm for the latter.

I do love iFixit teardowns though, daring to go where no one is intended to.

I salute you, iFixit!

gamma

Robert French -

@atomicsymphonic Umm… you have to FREEZE it to get it open! Essential Phone Teardown It got a repairability score of 1.

Liam Powell -

Does the bottom left of the phone still just have a dummy panel covering the speaker grill?

John - Replica

If you’re thinking of the barometric vent, then yes! You can see it in the third image on step 17.

Sam Lionheart -

It looks like the mysterious chip was attached to the lower speaker…any idea what it is used for?

Lewie Edwards - Replica

It is still mysterious!

Satyajeet Vishwakarma -

Does the mystery chip possibly contain the data for the user’s facial recognition? Apple said that data would be stored on the phone only - and nowhere else - out of privacy concerns.

HL Dash -

Were you able to verify that face recognition still worked once the phone was re-assembled?

Cindy Leek - Replica

Facial Recognition works. But proximity sensor has to be swapped over to maintain Face ID after a screen swap.

Matt Davis -

iv tried today to swap screens on two iPhone X without swapping over any parts, just the screens and Face ID stopped working on both. ill try later to swap the proximity sensor to see if that fixes the Face ID.

roy -

I swapped two screens from one to the other on the iPhone X and Face ID stopped working on both. ill try later to see if swapping the proximity sensor fixes the Face ID not working.

roy -

Should be much easier to repair without the virtual touch id button.

John Knirr - Replica

Is the top speaker better or worse than the 8? It was never very balanced with the bottom one on mine. It looks different here, more square.

tipoo - Replica

this looks like a science fiction movie, very big WOW

forrest gump - Replica

Be nice if the person breaking down the phone, or at least the one who writes up the Teardown, had some engineering training, some of the text above was completely unintelligible, unscientific and used wrong terminology in descriptions. Apart from that, though, great! LOL

vkd - Replica

And you’re perfect in everything that you do right? If you’re so smart you should have filtered through all type O’s and kept your rude post to yourself, JACKASS!!

lucien arsenault -

Have you tried swapping parts from one phone to the other?

Tony Tone - Replica

Stay tuned ;)

Sam Lionheart -

The next thing to go is the nano sim tray for sure it's so large compared to the logic board.

Kailen Bittner - Replica

Apple’s almost definitely going to replace it with an eSIM in the next model. I sure hope so. https://www.blog.google/products/project...

Liam Powell -

Can you show us the OLED (Super Retina) display which Apple says supposedly folds in under itself?

jk379b - Replica

Could we please see more angles of the “sandwich” board before it was separated?

makenb - Replica

What about the screen essentially folding backwards on top of itself? I was wondering about that in a tear down like this. Here’s what I’m referring to: https://boygeniusreport.files.wordpress....

Frank Durocher - Replica

What part is the TI 78AVZ81????  Can’t find it on TIs website.

Greg - Replica

Which model is this iPhone? A1865 or A1903?

Gechen - Replica

We picked up an A1865 in Australia!

Kyle Wiens -

Is the gold plated part in step 12 a sim card reader? If so we definitely need esim

K Sec - Replica

this iPhone can work with one side of the logic board desoldered . you have to use it however as an iPod or iPad without wifi and bloetooth.

Efemann Computer - Replica

without harddriver either!!!

imnotar -

Could you check readings on that vias? (just some of them) and confirm whether they are grounded, empty or data, power lines?

bart6665 - Replica

Seems like Apple is designing a few more chips now.

T Hui - Replica

Maybe I missed it, but did we find out what the chip next to the speaker is? It was called out with a green box on the X-Ray in the 3rd step. I don’t think i saw the explanation.

gregkramer - Replica

I believe you’re talking about the chip in Step 20!

Dom Santangelo -

Just a guess, but the “Unidentified sensor bracket” in Step 21 could be related to Apple’s new leather folio case which wakes the phone upon opening and sleeps upon closing.

Antoine V - Replica

I’m sure the IR proximity is what does that

Dan -

It’s unlikely to be the proximity sensor doing this, as then it would work with third party cases as well, not just Apple’s and would do something similar when just covering or uncovering the screen.

Justin Clifford -

In the iPhone X promo video from Apple, we can see the OLED screen is curved under itself, which I’ve read is to ensure a consistent light all the way to the edges of the phone.

_

I’ve looked above a few times at the various steps but don’t seem to find any reference to details on the OLED screen, which you’d imagine is a very important part of any smartphone.

_

iFixit, can you please add a 24th step that goes into detail on this? I can see from a couple of comments above that I’m not the only person wanting to know.

_

Thank you for your incredible work!

_

Regards

_

Alex

Alex - Replica

Any chance you can show us the folded OLED screen? Isn’t this an integral part of the phone? Why did you leave it out?

Alex - Replica

Any idea who they are using for the Qi charging IC?

Robert McCormick - Replica

Apple made there own coil. It has the apple insignia on it

zachary -

Are you able to put the phone back together and have it still be functional, or does this tear-down destroy the phone?

Peter Georgiton - Replica

There are too many screws on the iPhone X

Mandy - Replica

The degree of consolidation for functionality in the circuitry is unprecedented! State of the art.

Satyajeet Vishwakarma - Replica

Great work everyone! This is fantastic.

Nat Welch - Replica

Very nice, good explain

allwin2abbas - Replica

Very informative! I love your site!

robert benn - Replica

Ram wasn’t mentioned this year? What is it? How much ram?

chaosprodigy - Replica

3 GB of RAM in the A11 chip

Dan -

Great work. Congrats.

wilcamo - Replica

Are there other chips in different models I see no mention of Qorvo ??

ski3938 - Replica

Can you tell us if new soi substrat is used for the St MICRO system for the face recognition?

fredo - Replica

Face id only works if the phone is vertical.

John Knirr - Replica

Any commentary on the antenna design and how it compares to 8/7 (plus/nonplus)?

Phil Rosenthal - Replica

Mmm, where is the $999?

Autrak - Replica

iPhone X is the same wireless charging hardware design like iPhone 8 ? any difference?

TAIWAN FUSION - Replica

Excellent site do you only describe etc phones?

Michael Thomas Houton - Replica

IFIXIT covers many different products review the other tear downs here: https://www.ifixit.com/Teardown

Dan -

I just hope no costumer comes in with a broken rear…

Dion jonkheid - Replica

For the dual-cell battery, why adding 4.93Wh to 5.52Wh = 10.45Wh, instead of 10.35 Wh as marked?

Two different capacity cells in parallel connection lose 0.1Wh?

Daniel Xu - Replica

Awesome!! Already you did

goma - Replica

thanks lot for all ifixit team

Seydina Diaw - Replica

So amazing PCBs layout!

Rossicley M. Araujo - Replica

Very informative! I love your site…..

susmoy - Replica

Would appreciate your comments about the Snapdragon X16 Modem. Have the aireals been disabled by Apple in a smilar fashion to the way they were disabled on the Iphone 8 and 8Plus model 1865? This seems to be an important issue? Jack

john mcginty - Replica

哪一國型號的手機沒有標示清楚

Andy - Replica

Hi , i am interesting if wireless charging control IC from Broadcom have same function with IDT’s wireless charging receiver IC that been used in Samsung flagship smart phones? and is Broadcom a single sourcing for Iphone wireless charging IC?

thank you!

Renjie - Replica

This is too cool ! Do you have data on which parts are best in class the industry offers ?

NEERAJ BANSAL - Replica

lol Apple REVEALED! KUDOS IFIXIT

Mark Francisco - Replica

Will you be doing an in-depth tear down of the display itself? I’m super curious how Apple actually put this display together, especially after that outstanding product overview video.

BunkerS - Replica

Hi, I know that the iPhone X supports the auto sleep/wake function, as on iPads, using wallet covers like the original Apple Folio one, so I think there should be magnets inside the phone, is that true? If yes where they are? I saw tons of wallet covers on eBay that are sold as "magnetic" but they don't say if they support the auto sleep/wake function, anybody has tried one of these? Thanks

$tef94 - Replica

Could I replace the Entire Face ID Package, including the camera? Or is it paired to the Logic Board?

Matt H - Replica

So, is look like the Camera bump is very strong and durable since is welded to the body frame + glued to the glass. Right?

Time Line - Replica

How durable do you think the Camera bump welded to the Metal Frame + glued to the Glass (Glass glued to Metal frame)???

Time Line - Replica

Fantastic teardown guys!! I am curious about the stainless steel ring around the frame. It does appear that it’s composed of 4 distinct pieces due to the seams between.

Can you guys comment on how they’re connected to each other as well as the backplane?

It does make me wonder on the Space Grey version - are the 4 pieces PVD coated before they’re joined or after?

Steven Fischer - Replica

Any chance you guys will do a teardown of the display like you did with the iPhone 6s? I’m genuinely curious how on earth they made this gorgeous display!

BunkerS - Replica

I have I phone X now , and wear the phone by protection cover , couse I am afraid that back class will broke , do you have an other solution to save back phone ?

Abdulaziz - Replica

I work for a phone company and we are getting these phones returned by same group of people, they take the phone out then 24 hours they return it, the boxes are open but the phones are still in the plastic seals, it there anything that can be done to these phones they look as good as new but my gut is saying something has been done with the phones.

Mike Honell - Replica

Where is GPS antenna located?

yurkennis - Replica

Hello, please, iPhone X has two or only one bottom microphone? On picture is only one, and iPhone 6S, 7 have two.

Adam Krůžela - Replica

How the on screen finger print works? what kind of part’s it need to execute?

Arghadip Deb - Replica

There is no in screen touch ID. Just Face ID, and there’s no fingerprint reader anywhere on the phone.

Liam Powell -

Hi, please, where is fourth microphone at bottom of the phone? Integrated in speaker assembly? All phones since iPhone 7 has 4 microphones, and i counted there only 3.

Adam Krůžela - Replica

Where can I get an iPhone X chassis to fix my phone

Tanner Preston - Replica

The little white dot on the back of the wireless charging assembly, that is visible through the crack between the two batteries, is this another liquid damage indicator? If not, where are the rest of the internal liquid damage indicators aside from the small one in the sim card slot?

Paul - Replica

Hello were can i buy chassis for iphone X thanks

Koba Jgenti - Replica

unidentifed censer? They are spying on us lol

Grace Capozzi - Replica

The charge tip broke in my IPhone X. Can it be pulled out the same as the other iPhones

Lori - Replica

谢谢!Ifix的努力越来越好!同时祝我的手机越卖越好!

jungel - Replica

Can you guys tell me about specific dimension of all 3 part for TrueDepth camera?

jpuvmd - Replica

Is it possible to share the mass and dimension breakdown of the main components? Thank you!

Ginko - Replica

I expected to see an explanation on how they removed the bottom chin… where do the driving electronics go?

kurkosdr - Replica

very good! I want to tear my phone down too.

Omei - Replica

Wheres the antenna located? Top Bezel?

David Moheban - Replica

How do you remove the buttons from the casing?

Ad Iqbal - Replica

What’s the size of the back camera sensors? I want to compare it to my older dusty point and shoots.

Mihai Codoban - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1,368

Ultimi 7 Giorni: 7,250

Ultimi 30 Giorni: 24,349

Tutti i Tempi: 974,691