Salta al contenuto principale

Master and Dynamic MW50 Right/Left Speaker Replacement

Cosa ti serve

  1. Master and Dynamic MW50 Right/Left Speaker Replacement, Master and Dynamic MW50 Disassembly: passo 1, immagine 1 di 3 Master and Dynamic MW50 Right/Left Speaker Replacement, Master and Dynamic MW50 Disassembly: passo 1, immagine 2 di 3 Master and Dynamic MW50 Right/Left Speaker Replacement, Master and Dynamic MW50 Disassembly: passo 1, immagine 3 di 3
    • Pull the cushion off of the desired side by gripping the top of the headphones and pulling the cushion off.

  2. Master and Dynamic MW50 Right/Left Speaker Replacement: passo 2, immagine 1 di 1
    • Remove the four 5mm screws from the earpiece with a Y1 Triwing screwdriver.

  3. Master and Dynamic MW50 Right/Left Speaker Replacement: passo 3, immagine 1 di 1
    • Use the Jimmy to lift up the black cover to get inside the device.

  4. Master and Dynamic MW50 Right/Left Speaker Replacement, Right/Left Speaker: passo 4, immagine 1 di 1
    • Desolder the two wires connected to the speaker.

  5. Master and Dynamic MW50 Right/Left Speaker Replacement: passo 5, immagine 1 di 1
    • Use a heating gun to remove the glue from the speaker.

    • Once the glue is removed, gently pull out the speaker.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Katie Dunnigan

Membro da: 01/24/19

85 Reputazione

1 Guida realizzata

Team

Cal Poly, Team S1-G4, White Winter 2019 Membro di Cal Poly, Team S1-G4, White Winter 2019

CPSU-WHITE-W19S1G4

4 Membri

12 Guide realizzate

Un commento

This is awesome but Master & Dynamic don’t sell replacement 45mm 32 ohm drivers and won’t share the specs.

If anyone know where to get a replacement which will work well with these headphones please share!!!

paul

bloodygoose@icloud.com

psullivan_au - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 638