1. Remove the rubber stoppers from the four corners of the front screen.
    • Remove the rubber stoppers from the four corners of the front screen.

  2. Using the Phillips screwdriver, carefully remove all four screws.
    • Using the Phillips screwdriver, carefully remove all four screws.

  3. To pry open the face plate, place the iFixit Opener tool in the crease of the phone. To pry open the face plate, place the iFixit Opener tool in the crease of the phone.
    • To pry open the face plate, place the iFixit Opener tool in the crease of the phone.

  4. Spedizione gratuita per tutti gli ordini superiori a 100,00 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Carefully lift off the black frame around the LCD screen and set it aside. Carefully lift off the black frame around the LCD screen and set it aside.
    • Carefully lift off the black frame around the LCD screen and set it aside.

  6. Lift the speaker out by using tweezers.
    • Lift the speaker out by using tweezers.

    • Next, lift the battery out using the tweezers.

  7. Using tweezers, carefully disconnect the orange ribbon from the computer chip.
    • Using tweezers, carefully disconnect the orange ribbon from the computer chip.

  8. Remove the LCD screen and replace with a new one.
    • Remove the LCD screen and replace with a new one.

    • Finally, replace the battery and the speaker.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ashley

Membro da: 12/02/2013

9 Reputazione

3 Guide realizzate

Team

Ohio State, Team 1-1, Buehl Spring 2013 Membro di Ohio State, Team 1-1, Buehl Spring 2013

OSU-BUEHL-S13S1G1

3 Membri

4 Guide realizzate

Thanks for the instructions. By chance, do you know how to replace the motherboard? Where is the mother board

Sula Tremaine - Replica

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 389