Aggiusta la tua roba Comunità Store

Hover-1 Coast Controller Battery Replacement

Introduzione

In order for your Hover-1 Coast to be used, you must have a functioning controller. It is essential to have a fully functioning controller for the Hover-1 Coast to be used to it's full potential. This guide is not too difficult and can be done by anyone.

Cosa ti serve

  1. Hover-1 Coast Controller Battery Replacement, Controller Battery: passo 1, immagine 1 di 3 Hover-1 Coast Controller Battery Replacement, Controller Battery: passo 1, immagine 2 di 3 Hover-1 Coast Controller Battery Replacement, Controller Battery: passo 1, immagine 3 di 3

    • Identify the three screws and using a Phillips #1 screwdriver loosen the the screws.

    • Remove the three screws.

    Modifica

  2. Hover-1 Coast Controller Battery Replacement: passo 2, immagine 1 di 3 Hover-1 Coast Controller Battery Replacement: passo 2, immagine 2 di 3 Hover-1 Coast Controller Battery Replacement: passo 2, immagine 3 di 3

    • Pull the backside of the controller off.

    • The inside of the controller should look like this.

    • The marked area is the battery.

    Modifica

  4. Hover-1 Coast Controller Battery Replacement: passo 3, immagine 1 di 1

    • Remove the black foam piece covering the battery.

    Modifica

  5. Hover-1 Coast Controller Battery Replacement: passo 4, immagine 1 di 2 Hover-1 Coast Controller Battery Replacement: passo 4, immagine 2 di 2

    • Desolder the battery connections from the motherboard.

    Modifica

  6. Hover-1 Coast Controller Battery Replacement: passo 5, immagine 1 di 2 Hover-1 Coast Controller Battery Replacement: passo 5, immagine 2 di 2

    • Using a plastic opening tool, pry the battery off the motherboard.

    • The inside of the controller should look like this.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 387