/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi
Unisciti alla più grande community di riparazione al mondo
RicambiGuideRisposte
Traduci
HP Envy TouchSmart 15 Digitizer Replacement

HP Envy TouchSmart 15 Digitizer Replacement

Micah Kempf

Micah Kempf e 6 altri collaboratori

Ultimo aggiornamento il January 4, 2024

30 minuti - 2 ore
Moderato

Introduzione

Vai al passo 1

Use this guide to replace the digitizer screen on an HP Envy 15 TouchSmart. You may need to replace the digitizer if the laptop no longer detects touch or if the glass has cracked or shattered.

Cosa ti serve

Ricambi

Strumenti

Mostra di più…

iFixit guadagna commissioni quando acquisti tramite questi link.

  1. HP Envy TouchSmart 15 Digitizer Replacement, Touch Screen/Digitizer: passo 1, immagine 1 di 1

    • Lay the laptop down with the bottom facing up.

    Traduci

  2. HP Envy TouchSmart 15 Digitizer Replacement: passo 2, immagine 1 di 1

    • Slide the switch to release the battery and remove it.

    Traduci

  3. HP Envy TouchSmart 15 Digitizer Replacement: passo 3, immagine 1 di 2 HP Envy TouchSmart 15 Digitizer Replacement: passo 3, immagine 2 di 2

    • Remove the screw from the access panel. Gently lift and remove the panel.

    Traduci

  4. HP Envy TouchSmart 15 Digitizer Replacement: passo 4, immagine 1 di 3 HP Envy TouchSmart 15 Digitizer Replacement: passo 4, immagine 2 di 3 HP Envy TouchSmart 15 Digitizer Replacement: passo 4, immagine 3 di 3

    • Remove the hard drive and disconnect its ribbon cable from both the hard drive and the motherboard.

    Traduci

    Gently pry up on black ribbon clank then slide ribbon off motherboard

    chewfie - Replica

  6. HP Envy TouchSmart 15 Digitizer Replacement: passo 5, immagine 1 di 3 HP Envy TouchSmart 15 Digitizer Replacement: passo 5, immagine 2 di 3 HP Envy TouchSmart 15 Digitizer Replacement: passo 5, immagine 3 di 3

    • Remove the screws to loosen the bottom casing.

    • Remove the two feet to reveal the screws underneath.

    Traduci

    Description missed two screws on removing the back cover.

    Jacob - Replica

  7. HP Envy TouchSmart 15 Digitizer Replacement: passo 6, immagine 1 di 1

    • Gently pry the edges to loosen the case.

    • Once loose, lift and remove the plastic casing to reveal the motherboard.

    Traduci

  8. HP Envy TouchSmart 15 Digitizer Replacement: passo 7, immagine 1 di 2 HP Envy TouchSmart 15 Digitizer Replacement: passo 7, immagine 2 di 2

    • Lift and detach the wireless antenna cables.

    • Lift and de-route the wires from their tracks until you reach the display hinges.

    Traduci

  9. HP Envy TouchSmart 15 Digitizer Replacement: passo 8, immagine 1 di 1

    • Detach the two cables. Lift the tab for the ribbon cable before pulling it out.

    Traduci

  10. HP Envy TouchSmart 15 Digitizer Replacement: passo 9, immagine 1 di 2 HP Envy TouchSmart 15 Digitizer Replacement: passo 9, immagine 2 di 2

    • Remove the screws from each hinge.

    • Lift the hinges with pliers until they are perpendicular to the case.

    • Lift and remove the bottom of the laptop from the screen.

    Traduci

  11. HP Envy TouchSmart 15 Digitizer Replacement: passo 10, immagine 1 di 1

    • Lift the tabs in both the bottom corners and remove the screws beneath.

    Traduci

  12. HP Envy TouchSmart 15 Digitizer Replacement: passo 11, immagine 1 di 2 HP Envy TouchSmart 15 Digitizer Replacement: passo 11, immagine 2 di 2

    • Using a pry tool as necessary, remove the digitizer from the rest of the screen panel. Be careful around the top edge as there are delicate components beneath.

    Traduci

    Forgot to mention disconnecting the wire from the digitizer to the screen.

    Jacob - Replica

  13. HP Envy TouchSmart 15 Digitizer Replacement: passo 12, immagine 1 di 3 HP Envy TouchSmart 15 Digitizer Replacement: passo 12, immagine 2 di 3 HP Envy TouchSmart 15 Digitizer Replacement: passo 12, immagine 3 di 3

    • Using a heat gun, carefully loosen the adhesive connecting the digitizer to its plastic border.

    • Gently peel the digitizer away from the plastic border.

    • When installing the new one digitizer, press firmly around the edges.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Autore

con 6 altri collaboratori

Micah Kempf

Membro da: 03/30/16

260 Reputazione

1 Guida realizzata

Distintivi: 7

+4 altri distintivi

Team

Michigan Tech, Team 1-12, Lauer Spring 2016 Membro di Michigan Tech, Team 1-12, Lauer Spring 2016

MTU-LAUER-S16S1G12

1 Membro

1 Guida realizzata

4Commenti sulla guida

These directions are perfect. I was able to successfully change my digitizer in under an hour

Joe Russo - Replica

where do you get the digitizer?

Jacob - Replica

Amazing,

My name is Nevelson, I have exactly same laptop and mine also is broke, but I don't know where to get the replacement; only the sensor, please I need help and willing to pay handsomely.

Nevelson Odimgbe - Replica

Nevelson, I have updated this page to included a link to the part on amazon.

Micah Kempf - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 9

Tutti i Tempi: 14,368