Strumenti necessari in questo Smontaggio

Introduzione

Here you will see a breakdown of the Apple Studio Display M2454. This will be useful in repairing broken or malfunctioning parts in the future.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Apple Studio Display M2454, usa il nostro manuale di assistenza.

Notice that the main components of the monitor are only accessible from the back of the device.
  • Notice that the main components of the monitor are only accessible from the back of the device.

Aggiungi Commento

Locate the four hex head screws located on the corners of the back panel.
  • Locate the four hex head screws located on the corners of the back panel.

    • Remove the screws with a 2mm hex screwdriver.

Aggiungi Commento

  • Remove the clear and gray back panels.

Aggiungi Commento

  • Remove the three screws with #2 phillips head screwdriver.

Aggiungi Commento

  • To remove the metal panel, push towards the bottom of the monitor to release its clips and pull the panel away.

Aggiungi Commento

  • Remove screw holding the plastic bracket with #2 Phillips head screwdriver.

Aggiungi Commento

  • Remove the four screws on the metal bracket.

Aggiungi Commento

  • Remove the two philips head hold-down screws with the #2 Phillips head screwdriver.

Aggiungi Commento

  • Remove black connector by pushing the end of the tab closest to the wiring and pulling away from board.

Aggiungi Commento

  • Remove white connector by lifting tab and pulling away from board.

    • Be careful when lifting tabs, they break easily.

Aggiungi Commento

  • Remove connector connected to the hold down previously removed simply by pulling with hand.

Aggiungi Commento

  • Now that the main computer cable is detached, remove it away from monitor.

Aggiungi Commento

  • Remove the two screws holding the USB port in place with #2 Phillip's head screwdriver.

Aggiungi Commento

  • Remove the screw on the wire hold down with #2 Phillips head screwdriver.

Aggiungi Commento

  • Remove white connector connected to LCD main board by lifting tab with tool and pulling away from board.

Aggiungi Commento

  • The USB port is now detached, remove it from monitor.

Aggiungi Commento

  • Remove connector on the left bottom corner of the LCD main board by simply pulling with hand.

Aggiungi Commento

  • Remove the connector on the bottom right corner by 1st removing tape first and pulling with hand.

Aggiungi Commento

  • Remove top right connector of the LCD main board by pulling with hand.

Aggiungi Commento

  • Remove the final connector of the LCD main board by pulling with hand.

Aggiungi Commento

  • Remove the four screws on each corner of the main board with #2 Phillips head screwdriver.

Aggiungi Commento

  • The board is now detached, remove it from monitor.

Aggiungi Commento

  • Locate the top and bottom connector on the CCFL inverter and remove it by inserting pin into the small holes and pulling away.

    • This step may be easier with two people.

Aggiungi Commento

  • Remove the two screws on the top and bottom of the CCFL inverter with #2 Phillips head screwdriver.

Aggiungi Commento

  • The CCFL inverter is now detached, remove it from monitor.

Aggiungi Commento

  • You have now successfully taken apart a Apple Studio Display M2454.

Aggiungi Commento

Dylan Perry

Membro da: 20/01/2010

129 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 13-27, Maness Winter 2010 Membro di Cal Poly, Team 13-27, Maness Winter 2010

CPSU-MANESS-W10S13G27

4 Membri

5 Guide realizzate

This model is also known as the Apple Studio Display 15" LCD.

analogcd - Replica

excellent wee guide......i came here in my search for a replacement stand for this model.

bobby nailen - Replica

Failing caps were the main problem with this — no air flow.

Mal - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 20

Tutti i Tempi: 6,012