Salta al contenuto principale
Unisciti alla Community delle riparazioni - Crea un account

La Xbox One S, progettata da Microsoft Corporation, è stata lanciata nell'agosto 2016. La Xbox One S è una riprogettazione della Xbox One.

Is this a problem

I’m replacing a HDMI on an Xbox one S and 2 pads look to be bridged I’ve tried to go over it with desoldering wick but it doesn’t seem to change I’m unsure if the solder mask has come away is there a way to fix this

Immagine
Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione prescelta

Hi!

The last pin is definitely damaged and got seperated from the trace there.

You need to unbridge the pin first, then try to reconnect it to the trace. You can carefully scratch there to reveal the copper. Then you can connect them to together.

Hopefully that will do the job! Not gonna lie, it won’t be easy.

Please let me know how that goes!

Questa risposta è stata utile?

Punteggio 1

4 Commenti:

Thanks but I’ve ended up tearing another pad off attempting to tin the pads due to a faulty iron I put too much solder on tried to wick some away and as I was doing so my iron died was only a cheap one from Amazon will look at getting a better quality one

da Condividi

Ah, if the damage completely killed the pads over there, a motherboard refurb or replacement is required. Hopefully the damage is not too bad. In that case you might still be able to repair it with a new soldering iron!

da Condividi

Thanks the damage doesn’t look too bad think it should be fixable with a new soldering iron and some wire 🤞

da Condividi

Alright! Fingers crossed :)! Please let me know how it goes! Thank you!

da Condividi

Aggiungi un commento

Aggiungi la tua risposta

Martin Larkin sarà eternamente grato.
Visualizza statistiche:

Ultime 24 ore: 7

Ultimi 7 giorni: 47

Ultimi 30 giorni: 47

Tutti i Tempi: 47