@erinevans26907 sounds like you have a good plan. Besides the great answer provided by my colleague @dadibrokeit this may help you out a bit as well.
+
@erinevans26907 sounds like you have a good plan. Besides the great answer provided by my colleague @dadibrokeit this may help you out a bit as well. This is not a separate answer, just an augmentation to the prior given answer.
-
Here is the location of the sensor:
+
Here is the replacement procedure for your output speed sensor:
To replace that, you will have to remove the valve body cover,valve body as well as the main solenoid and temp sensor harness.
+
Besides your wiring harness etc., you also want to go ahead and reset your TCM and check that as well. You can get all the information about all of that by using the service manual. You have free access (who knows for how long ;-) [https://www.helantraad.com/hyundai_elantra_ad_2016_2020_service_manual-2840.html |on here]
@erinevans26907 sounds like you have a good plan. Besides the great answer provided by my colleague @dadibrokeit this may help you out a bit as well.
Here is the location of the sensor:
[image|2930488]
To replace that, you will have to remove the valve body cover, valve body as well as the main solenoid and temp sensor harness.
@erinevans26907 sounds like you have a good plan. Besides the great answer provided by my colleague @dadibrokeit this may help you out a bit as well.
Here is the location of the sensor:
[image|2930488]
To replace that, you will have to remove the valve body cover, valve body as well as the main solenoid and temp sensor harness.
@erinevans26907 sounds like you have a good plan. Besides the great answer provided by my colleague @dadibrokeit this may help you out a bit as well.
Here is the location of the sensor:
[image|2930488]
To replace that, you will have to remove the valve body cover, valve body as well as the main solenoid and temp sensor harness.