Salta al contenuto principale
Aiuto

Versione corrente di: Richdave

Testo:

-Is there an internal water tank? If so, check that it is correctly positioned inside the cabinet. Even if you have a constant drain setup, there will be a sensor to confirm the tank is installed correctly. Perhaps this sensor/switch is damaged or jammed.
+Is there an internal water tank? If so, check that it is correctly positioned inside the cabinet. Even if you have a constant drain setup, there will be a sensor or switch to confirm the tank is installed correctly. Perhaps this sensor/switch is damaged or jammed.
Also the compressor may have a time delay after the tank is installed - wait a while to see if it starts up OK

Stato:

open

Modifica di: Richdave

Testo:

Is there an internal water tank? If so, check that it is correctly positioned inside the cabinet. Even if you have a constant drain setup, there will be a sensor to confirm the tank is installed correctly. Perhaps this sensor/switch is damaged or jammed.
+
+Also the compressor may have a time delay after the tank is installed - wait a while to see if it starts up OK

Stato:

open

Post originale di: Richdave

Testo:

Is there an internal water tank?  If so, check that it is correctly positioned inside the cabinet.  Even if you have a constant drain setup, there will be a sensor to confirm the tank is installed correctly.  Perhaps this sensor/switch is damaged or jammed.

Stato:

open