Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.
Traduzione in corso passo 1
Passo 1
-
If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows:
-
Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
-
Push the fingerprint sensor off of its adhesive from the outside of the glass.
-
If the sensor is stubborn, gently slide an opening pick under the plastic backing to loosen the adhesive before pushing.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.