Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 14le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 8

Passo 8
To install a new back cover:
  • To install a new back cover:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • Follow this guide to reinstall the old back cover, or to install a back cover without pre-installed adhesive.

  • Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.

  • If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.

  • You may also need to transfer the camera bezel to your new part. If that's the case, follow our camera bezel replacement guide.

Prima di rimontare il vetro posteriore, devi rimuovere i residui di colla.

Usa delle pinzette per rimuovere l'adesivo rimasto sul vetro posteriore e sul telaio.

Pulisci i bordi di giunzione con alcol isopropilico a concentrazione elevata (almeno 90%) poi applica il nuovo adesivo.

[* icon_reminder] Before replacing your rear glass you will need to remove the old adhesive.To install a new back cover:
[* black] Use tweezers to remove thepeel away any remaining adhesive residue onfrom the glass back and frame.
[* black] Clean
phone's chassis. Then clean the joining edgesadhesion areas with high concentration isopropyl alcohol (at least 90%), then apply90%) and a lint-free cloth to prep the surface for the new adhesive.
[* black] Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.
[* icon_reminder] [guide|124003|Follow this guide|new_window=true] to reinstall the old back cover, or to install a back cover without pre-installed adhesive.
[* icon_note] Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.
[* icon_note] If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.
[* icon_reminder] You may also need to transfer the camera bezel to your new part. If that's the case, follow our [guide|122484|camera bezel replacement guide|stepid=236006|new_window=true].
[* icon_reminder] Before replacing your rear glass you will need to remove the old adhesive.To install a new back cover:
[* black] Use tweezers to remove thepeel away any remaining adhesive residue onfrom the glass back and frame.
[* black] Clean
phone's chassis. Then clean the joining edgesadhesion areas with high concentration isopropyl alcohol (at least 90%), then apply90%) and a lint-free cloth to prep the surface for the new adhesive.
[* black] Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.
[* icon_reminder] [guide|124003|Follow this guide|new_window=true] to reinstall the old back cover, or to install a back cover without pre-installed adhesive.
[* icon_note] Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.
[* icon_note] If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.
[* icon_reminder] You may also need to transfer the camera bezel to your new part. If that's the case, follow our [guide|122484|camera bezel replacement guide|stepid=236006|new_window=true].

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.