Traduzione in corso passo 10
Passo 10
Prepare cables on new fan
-
On this fan, I first attached the "dongle" that adapts the 3-pin connector on the fan to the 4-pin old-school molex connector. This is to help figure out which conductors are positive, negative, and speed sensor, because the new fans did not have color-coded conductors. (The speed sensor will not get used here)
-
Mark on you new fan which conductor is black (negative), and which is positive (red).
-
Once you have marked the cable, cut the 3-pin connector off.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.