Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 2

Passo 2
Once the rear glass is hot to the touch, apply a suction cup near the bottom edge  of the glass. Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap. Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.
  • Once the rear glass is hot to the touch, apply a suction cup near the bottom edge of the glass.

  • Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap.

  • Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.

Posez une ventouse pour les gros travaux sur la moitié inférieure de la vitre arrière.

Accrochez la ventouse en soulevant la poignée rabattable et en mettant le loquet afin de verrouiller les deux poignées ensemble.

[* black] AttachOnce the rear glass is hot to the touch, apply a heavy-duty suction cup tonear the lower half ofbottom edge of the rear glass panelglass.
[* black] SecureLift on the suction cup by raisingto create a small gap underneath the hinged handlerear glass, and flippinginsert an opening pick into the latchgap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap
to clamp both handleshelp weaken the adhesive in placethe following steps.
[* black] AttachOnce the rear glass is hot to the touch, apply a heavy-duty suction cup tonear the lower half ofbottom edge of the rear glass panelglass.
[* black] SecureLift on the suction cup by raisingto create a small gap underneath the hinged handlerear glass, and flippinginsert an opening pick into the latchgap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap
to clamp both handleshelp weaken the adhesive in placethe following steps.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.