Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 5

Passo 5
Once you've opened the gap enough, insert the tip of an opening pick under the glass. Slide the pick along the bottom edge to separate adhesive holding the screen to the case. Be careful not to insert the opening pick too far. Only about 1/8" ( about 3 mm) is necessary, any deeper and you may damage cables.
  • Once you've opened the gap enough, insert the tip of an opening pick under the glass.

  • Slide the pick along the bottom edge to separate adhesive holding the screen to the case.

  • Be careful not to insert the opening pick too far. Only about 1/8" ( about 3 mm) is necessary, any deeper and you may damage cables.

Als je de opening eenmaal genoeg vergroot hebt, steek je de punt van een openingsplectrum onder het glas.

Schuif je plectrum langs de onderkant om daar de lijm die het scherm aan de behuizing bevestigt, door te snijden.

Let erop dat je je plectrum niet te ver in de horloge schuift. Ongeveer 3 mm is nodig en bij het dieper plaatsen van je plectrum loop je het risico kabels te beschadigen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.