Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.
Traduzione in corso passo 12
Passo 12
-
Roll the thermal putty into a ball.
-
Place the thermal putty where the damaged thermal pad was, making sure it's centered over the component—in this case a memory chip.
-
Optionally, you can use the flat end of a spudger (or an included applicator) to spread the thermal putty over the surface of the component.
| + | [* black] Roll the thermal putty into a ball. |
|---|---|
| + | [* black] Place the thermal putty where the damaged thermal pad was, making sure it's centered over the component—in this case a memory chip. |
| + | [* black] Optionally, you can use the flat end of a spudger (or an included applicator) to spread the thermal putty over the surface of the component. |
| + | [* icon_note] When you reattach the heat sink, you'll compress the thermal putty and it'll spread the ball out. |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.