Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

Sostituzione copertura posteriore Xbox Series X

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Italiano

Traduzione in corso passo 1

Passo 1

Uncover the back panel screws

Before you begin, completely power down and unplug all cables from your console.
Two stickers cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.
Heat an iOpener and lay it on the smaller sticker near the bottom of the back panel for two minutes.
Alternatively, you can use a hair dryer to heat the sticker.

+	[title] Uncover the back panel screws
+	[* icon_caution] *Before you begin, completely power down and unplug all cables from your console.*
+	[* icon_note] [link\|https://guide-images.cdn.ifixit.com/igi/ILtlPEkWqVaaBPqt.full\|Two stickers\|new_window=true] cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.
+	[* black] [guide\|25705\|Heat an iOpener\|new_window=true] and lay it on the smaller sticker near the bottom of the back panel for two minutes.
+	[* icon_note] Alternatively, you can use a [guide\|157348\|hair dryer\|new_window=true] to heat the sticker.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.

+	[title] Uncover the back panel screws
+	[* icon_caution] *Before you begin, completely power down and unplug all cables from your console.*
+	[* icon_note] [link\|https://guide-images.cdn.ifixit.com/igi/ILtlPEkWqVaaBPqt.full\|Two stickers\|new_window=true] cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.
+	[* black] [guide\|25705\|Heat an iOpener\|new_window=true] and lay it on the smaller sticker near the bottom of the back panel for two minutes.
+	[* icon_note] Alternatively, you can use a [guide\|157348\|hair dryer\|new_window=true] to heat the sticker.