Salta al contenuto principale

Het verwijderen van de achterste behuizing

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 5

Passo 5
Back Cover Removal, Remove the motherboard cover: passo 0, immagine 1 di 2 Back Cover Removal, Remove the motherboard cover: passo 0, immagine 2 di 2
Remove the motherboard cover
  • Be very careful not to puncture the battery with your screwdriver.

  • Use a Phillips screwdriver to remove the nine 3.6 mm‑long screws securing the motherboard cover.

  • The screw near the center of the top edge is covered by a sticker. Pierce through it with your screwdriver, or use tweezers to remove it.

Ga voorzichtig te werk en voorkom dat je je batterij beschadigt of doorboort met je schroevendraaier.

Gebruik een kruiskopschroevendraaier om de negen 3.6 mm lange schroeven, waarmee de moederbordcover bevestigd is, te verwijderen.

De schroef in het midden van de bovenste cover zit onder een sticker verstopt. Prik met je schroevendraaier door de sticker heen of verwijder de sticker met een pincet.

[title] Remove the motherboard cover
[* icon_caution] Be very careful not to puncture the battery with your screwdriver.
[* red] Use a Phillips screwdriver to remove the nine 3.6 mm‑long screws securing the motherboard cover.
- [* icon_note] The screw near the center of the top edge is covered by a sticker. Pierce through it with your screwdriver, or use tweezers to remove it.
+ [* icon_note] The screw near the center of the top edge is covered by a sticker. Pierce through it with your screwdriver, or use [product|IF145-020|tweezers] to remove it.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.