Salta al contenuto principale

Ember Mug Charging Base Pogo Pins Replacement

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Ember Mug Charging Base Pogo Pins Replacement, Dismount the Circuit Board: passo 0, immagine 1 di 3 Ember Mug Charging Base Pogo Pins Replacement, Dismount the Circuit Board: passo 0, immagine 2 di 3 Ember Mug Charging Base Pogo Pins Replacement, Dismount the Circuit Board: passo 0, immagine 3 di 3
Dismount the Circuit Board
  • Here we see the two halves separated, but connected by wiring.

  • The circuit board is held on with adhesive. Use your pry tool to gently separate the circuit board from the plastic mounting block it sits on.

  • During reassembly, make sure the cutout in the plastic base sits correctly over the circuit board.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.