Salta al contenuto principale

Samsung Galaxy Note20 후면 커버 교체

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Coreano

Traduzione in corso passo 4

Passo 4
Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 1 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 2 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 3 di 3
Cut along the perimeter of the rear cover
  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

후면 커버의 나머지 세 가장자리에 가열 및 절단 절차를 반복하세요.

각 모서리에 남겨 둔 픽이 만든 틈으로 새 여는 픽을 끼우세요.

다음 단계로 진행할 때, 접착제가 다시 붙지 않도록 각 모서리에 여는 픽을 남겨 두세요.

네 가장자리를 자른 후에도 후면 커버가 프레임에 여전히 연결되어 있으면, 여는 픽으로 접착제를 다시 자르세요.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.