Salta al contenuto principale

Reemplazo de la tapa trasera de Samsung Galaxy Note20

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 4

Passo 4
Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 1 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 2 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 3 di 3
Cut along the perimeter of the rear cover
  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

Repite el proceso de calentar y cortar el adhesivo a lo largo de los tres lados restantes de la tapa trasera.

Puedes insertar cada nueva púa de apertura en los huecos creados por las púas de apertura dejadas en cada esquina.

A medida que vayas avanzando, deja una púa de apertura en cada esquina para evitar que el adhesivo se vuelva a sellar.

Si la tapa trasera sigue pegada al marco después de cortar los cuatro lados, intenta cortar de nuevo el adhesivo con una púa de apertura.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.