Salta al contenuto principale

Samsung Galaxy Note20 Rückabdeckung tauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 4

Passo 4
Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 1 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 2 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 3 di 3
Cut along the perimeter of the rear cover
  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

Wiederhole das Verfahren, also das Erwärmen und Auftrennen des Klebers, an den restlichen drei Seiten der Rückabdeckung.

Setze jeweils ein neues Plektrum in den Spalt ein, der durch das Plektrum entstanden ist, welches in der Ecke stecken bleibt.

Lasse im Verlauf der Arbeit ein Plektrum in jeder Ecke stecken, damit sich der Kleber nicht wieder verbinden kann.

Wenn die Rückabdeckung immer noch am Rahmen festklebt, nachdem du alle vier Seiten aufgeschnitten hast, versuche nochmals mit dem Plektrum den Kleber aufzutrennen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.