Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 2
Passo 2
-
For the following steps, use tweezers:
-
Remove the connector equipped with the black and white wire.
-
Remove the connector equipped with the black, green, red, yellow, and white wires.
-
Using your fingers, remove the large connector located at the top right corner of the motherboard, as shown.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.