Salta al contenuto principale

Extracción de la tapa trasera

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 3

Passo 3
Back Cover Removal, Cut through the adhesive: passo 0, immagine 1 di 1
Cut through the adhesive
  • Note that there is more adhesive along the top edge and around the camera bezel than around the rest of the phone.

  • Cut carefully around the left edge near the fingerprint sensor or you risk damaging the ribbon cable inside.

  • If, at any point, the adhesive feels stubborn, apply more heat—not more force.

Ten en cuenta que hay más adhesivo a lo largo del borde superior y alrededor del bisel de la cámara que alrededor del resto del teléfono.

Corta con cuidado alrededor del borde izquierdo cerca del sensor de huellas digitales o te arriesgas a dañar el cable plano en el interior.

Si, en algún momento, el adhesivo se siente rebelde, aplica más calor, no más fuerza.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.