Salta al contenuto principale

Casio CTK-3000 Key Replacement/Cleaning Procedure

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Casio CTK-3000 Key Replacement/Cleaning Procedure, Remove keys: passo 0, immagine 1 di 2 Casio CTK-3000 Key Replacement/Cleaning Procedure, Remove keys: passo 0, immagine 2 di 2
Remove keys
  • Be sure to hold everything together as you turn the keyboard over. Be especially careful of the ribbon cable going to the left-most side of the keyboard.

  • Prop the top panel of the keyboard against something to hold it in place. Do the same for the left piece. The right piece can be put to the side

  • For each octave (7 white keys, 5 black keys), there is one set of 4 white keys and one set of 3 white keys (below the 4 keys). The black keys come in their own group at the very bottom of the "stack".

  • To remove the white keys, undo the screws and then lift the back of the set while pulling the keys towards you, up and out of the keyboard. It should lift right out

  • To remove the black keys, lift the back of the set and pull the keys out of the assembly. You may need to use a little more force.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.