Traduzione in corso passo 1
Passo 1
-
Remove the single 4.6mm Phillips #0 screw securing the fan.
-
Use a pair of tweezers to unplug the fan from the motherboard.
-
Pull the fan out.
[* red] Remove the single 4.6mm Phillips #0 screw securing the fan. | |
- | [* orange] Use a pair of tweezers to unplug the fan from the motherboard. |
+ | [* orange] Use a pair of [product|IF145-020|tweezers] to unplug the fan from the motherboard. |
[* black] Pull the fan out. |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.