Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

Repair a Cracked or Buckled Polyurethane Surfboard

Torna alla Guida

Inglese

Italiano

Passo precedente Passo successivo

Traduzione in corso passo 8

Passo 8

Repair a Cracked or Buckled Polyurethane Surfboard: passo 0, immagine 1 di 2

Repair a Cracked or Buckled Polyurethane Surfboard: passo 0, immagine 2 di 2

In your mixing cup, pour enough resin to cover the entire area thoroughly.
Mix in an even amount of Q-Cell filler and stir until well-mixed.
Once well mixed, add catalyst (hardener) as normal : i.e., 5-6 drops per 20ml of resin (a drop or two more if the weather is cold; a drop or two less if the weather is warm).
If doing a large mix (this repair is a large mix), you do not need to add as much hardener. 75% of the total will be fine as it is plenty to catalyze the reaction.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.