Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

Repair a Cracked or Buckled Polyurethane Surfboard

Torna alla Guida

Inglese

Italiano

Passo precedente Passo successivo

Traduzione in corso passo 4

Passo 4

Repair a Cracked or Buckled Polyurethane Surfboard: passo 0, immagine 1 di 3

Repair a Cracked or Buckled Polyurethane Surfboard: passo 0, immagine 2 di 3

Repair a Cracked or Buckled Polyurethane Surfboard: passo 0, immagine 3 di 3

You will fill the crack with a series of small foam wedges.
Polyurethane Foam isn't easy to find. If you know a shaper or a local shop that works on boards you might be able to snag a few scrap pieces. Check online if that doesn't work out.
Use the surform to grind down the sides of the piece so that they are flat and parallel.
You want the wedge to barely fit into its position. You will really have to jam it in with some force. Be careful not to snap it though, as the foam is very brittle.
The wedge should be tall enough so that it extends out both the top and bottom of your repair area. The portion hanging out will be sanded down in a later step.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.