Traduzione in corso passo 10
Passo 10
-
Removing Modem card if applicable.
-
Locate Modem bay on the middle left of the laptop next to the cooling assembly.
-
Disconnect the ribbon cable by unlocking the two side pressure pins, then pulling the ribbon cable free little force is necessary.
-
Remove 1 screw using a #0 Philip Screwerdriver.
-
Pull the modem card out but be careful because there is another cable underneath it.
-
Remove the 2 pin cable from underneath from the 2 pin header found on the modem card's PCB.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.