Traduzione in corso passo 7
Passo 7
Brake handle bungee installation - Part 1
-
Prepare bungees as shown in the picture with a loop on one side and a knot on the other side.
-
The loop should just be big enough to fit over your riser and not fall off.
-
Put the loop around the bottom of the riser as shown in the 2nd picture.
-
Do not pull the open end of the bungee through the loop at the bottom of the riser - the open end should come out to the 'outside' of the riser.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.