Salta al contenuto principale

How To Do An Oil Change With An Oil Extractor/Pump

Traduzione in corso passo 4

Inglese
Italiano
Passo 4
How To Do An Oil Change With An Oil Extractor/Pump: passo 0, immagine 1 di 3 How To Do An Oil Change With An Oil Extractor/Pump: passo 0, immagine 2 di 3 How To Do An Oil Change With An Oil Extractor/Pump: passo 0, immagine 3 di 3
  • Break the oil filter loose with a ratchet or filter wrench.

  • If the filter has a housing, remove the filter assembly and replace the filter inside.

  • Replace the O-ring. (A screwdriver may make this process easier.) Make sure the O-ring goes back into the same slot as before and lubricate it with some oil.

  • If your oil filter does not reuse the housing, skip these steps and go straight to lubricating the O ring on the new filter.

  • Brake clean can be used to clean the inside of the housing but it is not necessary.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.