Salta al contenuto principale

iPod Touch 7th Generation Logic Board Assembly Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
iPod Touch 7th Generation Logic Board Assembly Replacement: passo 0, immagine 1 di 1
  • Flip the logic board assembly back over to expose the connectors on the back.

  • Use the edge of a plastic opening tool to gently pry the antenna connector off the back of the logic board.

  • This cable is very delicate; be careful not to stress the point where it connects to the antenna.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.