Traduzione in corso passo 5
Passo 5
Add jumpers to the board
-
Before you can program the board, make sure all the necessary pins have jumpers. Jumpers allow you to toggle between different board settings.
-
The jumpers you need are:
-
JP1 - Power the board directly from the battery (not the voltage regulator) JP1 (the bottom two pins are jumped)
-
JP2 - top two pins - controls how we power the modem
-
ST and XB - jump all of the status LEDs
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.