Salta al contenuto principale

Cen-Tech Seven Function Digital Multimeter Fuse Replacement

Traduzione in corso passo 2

Inglese
Italiano
Passo 2
Cen-Tech Seven Function Digital Multimeter Fuse Replacement: passo 0, immagine 1 di 3 Cen-Tech Seven Function Digital Multimeter Fuse Replacement: passo 0, immagine 2 di 3 Cen-Tech Seven Function Digital Multimeter Fuse Replacement: passo 0, immagine 3 di 3
  • Remove the first screw from the backplate using a Phillips #0 Screwdriver.

  • Turn the screws counter clockwise to remove them, and turn the screws clockwise will re-insert them.

  • Store the first screw in a safe place.

  • Using a bowl, container with a lid, or a magnet to hold and keep track of your screws is always good practice.

  • Repeat this process for the second screw.

  • Sometimes the fuse will not want to pop or fall out of the hole. If you keep trying to unscrew the screw, and you feel a very subtle popping effect coming from the screw, this means the screw is free. You can try smacking the back of the meter against your hand to try and pop the screw free.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.