Salta al contenuto principale

Introduzione

Prereq only.

Parti

Nessuna parte specificata.

  1. Use a set of tweezers to remove any tape covering the front-facing camera cable clips. Use a set of tweezers to remove any tape covering the front-facing camera cable clips.
    • Use a set of tweezers to remove any tape covering the front-facing camera cable clips.

  2. Batterie per PC portatili

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Acquista ora

    Batterie per PC portatili

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Acquista ora
  3. Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector. Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector. Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector.
    • Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector.

  4. Use a plastic opening tool to lift the front-facing camera cable connector straight up off of its socket on the logic board. Be sure to only pry on the connector, not the socket itself.
    • Use a plastic opening tool to lift the front-facing camera cable connector straight up off of its socket on the logic board.

    • Be sure to only pry on the connector, not the socket itself.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Membro da: 18/10/2012

378.688 Reputazione

543 Guide realizzate

Team

iFixit Membro di iFixit

Community

99 Membri

9.250 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 26