Skip to main content

Modifiche al passo #4

Modifica in base a pauldindy-

Modifica approvata da Andrew Optimus Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the following screws securing the display assembly to the metal frame:
[* red] Thirteen 3.2 mm silver Phillips screws
[* orange] Two 4.25 mm black Phillips screws
[* yellow] In 3G models, the two top-center Phillips screws that are slightly lower and on the top of the motherboard.
[* black] Note that the assembly for the non-3G model will NOT fit the 3G model. When looking for the 3G assembly, look for model 'ME370TG', and note that in pictures of the 3G verison the top 2 phillips screw holes are slightly lower than the upper right and left ones.
[* yellow] In 3G models, the two top-center Phillips screws that are slightly lower and on the top of the motherboard.
[* black] Note that the assembly for the non-3G model will NOT fit the 3G model. When looking for the 3G assembly, look for model 'ME370TG', and note that in pictures of the 3G verison the top 2 phillips screw holes are slightly lower than the upper right and left ones.