Skip to main content

Modifiche al passo #1

Modifica in base a Jake Devincenzi-

Modifica approvata da Jake Devincenzi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Peel the upper piece of black adhesive tape completely up off the Nexus 7.
[* black] Similarly, peel the lower piece of black adhesive tape, but only as far as the copper strip.
[* icon_note] It is helpful to fold this piece of tape back on itself to keep it out of the way.
[* black] Watch foricon_caution] Whilst pulling the tape, be sure that the metal shield lifting when pulling the tapedoes not lift up. Hold itthe shield in place, orand if it lifts up, re-seat it in the spring clips around the perimeter of the shielded area.
[* black] Watch foricon_caution] Whilst pulling the tape, be sure that the metal shield lifting when pulling the tapedoes not lift up. Hold itthe shield in place, orand if it lifts up, re-seat it in the spring clips around the perimeter of the shielded area.