Modifiche a questo Step
Modifica di Sam Tooley —
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] Remove wifi card. Be aware, this is a little tricky. |
|---|---|
| + | [* black] First detach the small silver wires, by pulling firmly. Make sure you don't damage them, because they will need to reconnect to a potential replacement. They will release without a lot of force. |
| + | [* black] Now locate the small spindles on each side of the wifi card. Using a fingernail, or the plastic tool, carefully pry them away. They are designed to release/reengage. Make sure the spindle on each side is disengaged. |
| + | [* black] Finally, pull the card out using your fingers. It is tightly squeezed into its housing, so don't be afraid to give it a good yank. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto