Modifiche al passo #9
Modifica di Brianna Rukes —
Modifica approvata da Brianna Rukes
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Using a Phillips #0 screwdriver, remove the |
|---|---|
| + | [* red] Using a Phillips #0 screwdriver, remove the two screws (Length: 7.7 mm) that hold the speaker in place. |
| [* black] Follow the wire until you find the ribbon cable that holds the wires and pull straight out of the connect to remove it. | |
| [* black] You are now free to replace the speakers. | |
| [* icon_note] There are two speakers so be sure to repeat the same steps for the second speaker. |