Modifiche al passo #3
Modifica di Eileen Tran —
Modifica approvata da Eileen Tran
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Use a PH1 screwdriver to remove the 8 mm screws located as shown in the picture. There are a total of |
|---|---|
| + | [* black] Use a PH1 screwdriver to remove the 8 mm screws located as shown in the picture. There are a total of 22 screws on the board, with 3 under the circuit board. |
| [* black] Use a JIS-1 screwdriver to remove the 7 mm screws attaching the circuit board to the main board. There are 3 total. |