Modifiche al passo #1
Modifica di Collin Rapp —
Modifica approvata da Collin Rapp
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* icon_caution] Ensure the camera is turned off and the battery is removed. | |
| - | [* red] Using a Phillips #000 screwdriver, remove the |
| - | [* orange] Remove the |
| - | [* yellow] Finally, remove the |
| + | [* red] Using a Phillips #000 screwdriver, remove the four 2-mm screws from the side of the camera. |
| + | [* orange] Remove the two 3-mm screws from the other side of the camera. |
| + | [* yellow] Finally, remove the three 4-mm screws from the bottom of the camera. |